LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
Replacing of the automatic transmission light http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=89416 |
Page 1 of 1 |
Author: | LotusGiorgio [ Wed Nov 07, 2018 9:27 am ] |
Post subject: | Replacing of the automatic transmission light |
Hi guys, the automatic transmission light bulb is electrocuted. I discovered that the bulb is a 1.4w T5. Can i put a T5 LED? However, does anyone know how to extract it? it's easy? Is there a guide or a video on YouTube? Thanks! |
Author: | lfhoward [ Wed Nov 07, 2018 10:38 am ] |
Post subject: | Re: Replacing of the automatic transmission light |
Is this the light you mean? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=71724 |
Author: | LotusGiorgio [ Wed Nov 07, 2018 1:03 pm ] |
Post subject: | Re: Replacing of the automatic transmission light |
exactly, could you tell me how it is extracted? is it very difficult? Is there a guide on youtube? |
Author: | lfhoward [ Wed Nov 07, 2018 2:56 pm ] |
Post subject: | Re: Replacing of the automatic transmission light |
Pull up the plastic trim piece on the center console (in front of the cupholders) from the rear corners first. Unclip the wire harness from underneath the 4WD shifter, then you can fully remove the trim. Once that trim piece is out of the way, look at the drivers side of the black PRND21 block. You will see a pair of small blue (I think) wires there running to the light socket. Turn the light socket 90 degrees, then you can pull it out to access the light. |
Author: | LotusGiorgio [ Thu Nov 08, 2018 8:13 am ] |
Post subject: | Re: Replacing of the automatic transmission light |
lfhoward wrote: Pull up the plastic trim piece on the center console (in front of the cupholders) from the rear corners first. Unclip the wire harness from underneath the 4WD shifter, then you can fully remove the trim. Once that trim piece is out of the way, look at the drivers side of the black PRND21 block. You will see a pair of small blue (I think) wires there running to the light socket. Turn the light socket 90 degrees, then you can pull it out to access the light. Thank you! To read it does not seem difficult. We hope also disassembling it proves easy! What do you know is it possible to put the LED light? this for example? https://www.ebay.it/itm/2PCS-Car-T5-37- ... :rk:4:pf:0 OR https://www.ebay.it/itm/10-AUTO-LAMPADI ... :rk:9:pf:0 OR canbus https://www.ebay.it/itm/10X-T5-OSRAM-30 ... rk:23:pf:0 https://www.ebay.it/itm/AEDF-2X-T5-W16W ... rk:31:pf:0 |
Author: | LotusGiorgio [ Sat Nov 10, 2018 3:30 pm ] |
Post subject: | Re: Replacing of the automatic transmission light |
I found the video guide on a JK wrangler. It seems rather simple. Or maybe not ahaha Those interested in replacing here can find a video proof https://www.youtube.com/watch?v=v-Uw6Z93j_A |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |