2927-90009 HD/ 2731-60069 MD
4 wheels parts installed the lift along with a few extra parts. It is similar to the jeepinbyal kit.
Before lift was 31 inches front and 32 inches rear. After lift is just over 34 inches all around.
[b]TELLS US NOTHING AT ALL
C[/b]enter of tire to inner fender is @20.5.
I only have a basket rack and rock sliders, no plans for anything else.
The rims do have more than 5 inches back spacing.
Original(No Lift) New Size
245/60/18 245/70/17
Diameter 29.6" 30.5"
Width 9.6" 9.6"
129mm BS 5.07'' 137mm BS 5.39''
top of tire to fender is 0.45" Closer
I know this question has been beaten to death
and I hesitated writing the post but I figured why not when I am dropping this kind of cash. I have read every post I could find, it seems like most folks using a 8 inch wheel have 0 off set. The stock 18s are 40 offset and the 17x8 rim has a 35 offset and fit fine. I just wasn't sure if the tire would rub or not.
MAN wish you would of checked before having those jerks do the lift but you have it now
As far as rubbing different manufacturers/ different tread patterns etc affect the over all rubbing