| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| JBA Adjust-A-Struts Total Control Valve Settings http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=88&t=89580 |
Page 1 of 1 |
| Author: | Gilcano [ Tue Jan 01, 2019 2:17 pm ] |
| Post subject: | JBA Adjust-A-Struts Total Control Valve Settings |
Ok this question is for the “guru” of lifts guys: JBA recommended setting 12 clicks on Rebound 4. Clicks on Compression My mechanic installed the struts and adjusted the height to my preciously OME lift but he doesn’t have an idea of what is this. Please explain  Sent from my iPhone using Tapatalk Pro |
|
| Author: | tommudd [ Wed Jan 02, 2019 7:33 pm ] |
| Post subject: | Re: JBA Adjust-A-Struts Total Control Valve Settings |
Very simple really "R" is of course rebound, as you turn it to the " + " side you can actually feel each " notch turn it to feel 12 clicks/ notches Same on Compression what type of mechanic are you using anyways that doesn't know this ? |
|
| Author: | Gilcano [ Wed Jan 02, 2019 8:23 pm ] |
| Post subject: | Re: JBA Adjust-A-Struts Total Control Valve Settings |
tommudd wrote: Very simple really "R" is of course rebound, as you turn it to the " + " side you can actually feel each " notch turn it to feel 12 clicks/ notches Same on Compression what type of mechanic are you using anyways that doesn't know this ? Hey @Tommudd thanks a lot, also called Mr. Marlin at JeepinByAl and he explained the process for me. You know some “mechanics” only replace parts. Thanks again Sent from my iPad using Tapatalk Pro |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|