Patrick Lang wrote:
I’m looking at replacing my RC with OME
Anyone use Rocky road Outfitters “under-the-top strut mount/spacer?
Any pictures or links on the forum that has pictures?
I have Rancho shocks that are roughly a year old and Marlin w/JBA said they will work just fine. I plan to keep them until later on down the road.
I was recommended OME HD front springs to help with nose dive issue i’m having when braking hard. I plan to change the rear lift...eventually. I do not have aftermarket bumpers or anything. Just lift kit, wheels, and tires
Thanks in advance
Have you considered the clevis spacer that goes on the shock tube and sets on top of the mounting clevis?
They are available in three different thicknesses from JBA to give you some additional lift.
Some people just simply stack several 2" conduit nuts at this location that you can buy from a hardware store or one of the big box builders stores.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve