It is currently Thu Mar 28, 2024 3:38 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: New motor throwing codes
PostPosted: Thu Sep 03, 2020 7:01 am 
Offline
LOST Newbie

Joined: Fri Apr 08, 2011 12:59 pm
Posts: 12
So I just replaced the motor in my 11 kk last weekend because it dropped the seats, also replaced plugs, wires, coils, air intake, cats, o2 sensors crank sensor and muffler. Now I am getting codes for high voltage on all 4 o2 sensors and IAC rpm higher than expected, also it will not go in closed loop. A few searches have me thinking possibly the coolant temp sensor may be screwing things up but can't seem to find the ohm chart to test it. Any help or ideas would be great, thanks in advance


Top
 Profile  
 
 Post subject: Re: New motor throwing codes
PostPosted: Thu Sep 03, 2020 4:20 pm 
Offline
Moderator
Moderator
User avatar

Joined: Sat Aug 24, 2013 11:36 pm
Posts: 7157
Location: Central GA
Found this, cannot guarantee it is a perfect chart for your Jeep. :wink:
Maybe able to use it as a guide?

Image

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited :JEEPIN:
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount

98 Dodge Cummins 24 Valve


Top
 Profile  
 
 Post subject: Re: New motor throwing codes
PostPosted: Thu Sep 03, 2020 7:45 pm 
Offline
LOST Newbie

Joined: Fri Apr 08, 2011 12:59 pm
Posts: 12
Thanks man. Hoping that sensors bad and solves the issue, otherwise im not sure what the problem is


Top
 Profile  
 
 Post subject: Re: New motor throwing codes
PostPosted: Sat Sep 05, 2020 3:03 pm 
Offline
LOST Newbie

Joined: Fri Apr 08, 2011 12:59 pm
Posts: 12
Figured out the issue. Dont use any o2 sensor other than ngk cause they wont work right


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com