TIA. I had an issue with my 08 Liberty AC, it had a leak from the low pressure hose. I replaced the hose, the expansion valve, and the receiver dryer. I pulled vacuum for 1 hour, and then let it hold vacuum for an hour, there are no leaks now. I got about 5 ounces of r-134 in the system, and have 110 psi on the low side, and with the AC running, and about 125 psi on the high side. The compressor clutch engages and stays engaged, once some of the refrigerant got into in the system. It took over an hour to get half a can into the system. Searches indicate it could be a bad expansion valve, a bad low pressure switch, a bad compressor, etc. I'd rather not throw more parts at it. Any help is appreciated. Thanks!
|