Was just installing my new diff cover and put the cover on with just 2 bolts to check clearance, installed the track bar and it is about 3/8 of an inch from the fill bolt. If I pull down on the hitch it makes contact easily. I'm sure a bumb would destroy it. 2nd pic is with me pulling down on the hitch making contact.

Any advice?

https://drive.google.com/file/d/11DucIG9A22VZMGAikbsLQf2jBrDOmD42/view?usp=drivesdk

What year model and front or rear?
I have the exact same cover on the rear of my 05, but it does not have a track bar as shown in your picture.

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve