| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| chips in painted plastic trim http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=9&t=61221 |
Page 1 of 1 |
| Author: | dgeist [ Wed Jun 15, 2011 6:26 pm ] |
| Post subject: | chips in painted plastic trim |
As much as I'd like to deny it, I have co-workers who are just parking lot louts...they open doors (mostly on my passenger side) right into my painted fender flares and never take ownership/apologize, etc. For those of you with the painted flares, you know you can scrape them with a harsh glance, so there are a bunch of little nicks and scuffs that won't polish out (depressed into the paint coat) or have paint layer (exposing small amounts of the plastic underneath). Is there a good method to fill/touchup these specific sections, none of which being bigger than about 1/4" square? I have the mopar color matched touch-up paint and have had good luck with a toothpick application on hood and other metal panel chips, but this is obviously different. Am I better off taking it to a pro or is there some magic mini-bondo product that will fill the little nicks and actually take the touch-up fairly smoothly? Dan |
|
| Author: | HoosierJeeper [ Thu Jun 16, 2011 8:35 pm ] |
| Post subject: | Re: chips in painted plastic trim |
I'd use the same method. Then I'd use some Ultimate compound with a buffer to blend it in. JMO. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|