I purchased a budget Bi-Xenon HID kit from ebay. (Has hi/low beam)
Was $160 delivered.
Being my 3rd HID kit install, it still took me close to 1hr to install it (first time on a KJ).
The ballast units are mounted in a ghetto way. Basically the brackets are clamped between the front 1/4 panel and the body.
Driver side:
Passenger side:
Low-beam in cabin:
Hi-beam in cabin:
Frontal shot:
Overview:
Not much room in the KJ to mount the ballast units. My method is not reliable but they seem secure for now. I'll be keeping an eye on them over the Coffs weekend trip. 4300k on this unit seems to have a tinge of pink so if I were to buy again from this guy I'd go 5000k. I would also go a H4 low beam only (use spotties as your hi-beam LOL), as the bi-xenon kits, the rear of the bulb is exceptionally big and the big rubber cover does not fit back on 100% without inverting the center section of it.
I was lazy and did not pull the headlights out. If you have bigger hands than me then you will need to pull the headlights out or employ a child/midget/dwarf for the job.
After all that I can now see on the road. Road signs on the left hand side light up really brightly and it does not seem to be glaringly bright to other road users (this maybe due to my rear being slightly higher than my front).
