From memory I think Palla has one, did show too much in his CRD, until, he had the torque converter TSB done and after the flash, most stuff worked, I think???? Then again I could be wrong and dreamt the whole thing
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Anyone using the ScanGauge??? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=93&t=30034 |
Page 1 of 1 |
| Author: | mikey [ Sat Mar 01, 2008 6:53 pm ] |
| Post subject: | Anyone using the ScanGauge??? |
Hi All, This bit of kit looks pretty cool, I assume that the jeep evic does a similar thing. Just wondering if anyone is running this unit in their KJ, and what your thoughts are on the unit. Cheers, Mikey http://www.ausjeepoffroad.com/forum/sho ... hp?t=70239[/url] |
|
| Author: | Albert [ Sat Mar 01, 2008 8:00 pm ] |
| Post subject: | |
I have the Scangague II and I like it. But it was cheaper getting it from the place that makes them unless there is a higher shipping cost to Australia or something. I seem to remember it was aroung $150 or around there. Don't recall exactly. Try googeling Scangague. They are in Mesa Arizona. I have the 3.7 gas engine. If you have the CRD it might be different. |
|
| Author: | mikey [ Sat Mar 01, 2008 8:13 pm ] |
| Post subject: | |
Thanks Albert, Was the install easy? Where did you mount it? I also have the 3.7 gasser. Cheers, Mikey. |
|
| Author: | Albert [ Sun Mar 02, 2008 12:20 am ] |
| Post subject: | |
mikey wrote: Thanks Albert,
Was the install easy? Where did you mount it? I also have the 3.7 gasser. Cheers, Mikey. I just plugged it in and ran the wire/cord under the dash to the left and up to the top of the dash tucking it in the crevace and set it on the dash up against the windshield directly in front of me as I am sitting in the drivers seat. It has stayed put and I can see it while driving. Real easy. I took it out and put it in another vehicle for a week or so and then put it back in the KJ. No problems. |
|
| Author: | GoldCoastJeepers [ Sun Mar 02, 2008 3:11 am ] |
| Post subject: | |
Wooders has them for just over $200. Cant remember exact price. According to LOST US, they work well in the petrol but there are a few clitches with the CRD. |
|
| Author: | cmohr [ Sun Mar 02, 2008 10:18 am ] |
| Post subject: | |
From memory I think Palla has one, did show too much in his CRD, until, he had the torque converter TSB done and after the flash, most stuff worked, I think???? Then again I could be wrong and dreamt the whole thing
|
|
| Author: | palla [ Fri Mar 07, 2008 5:41 am ] |
| Post subject: | |
Kinda sorta, i got a ODBII box, it plugs into the laptop then into the car. & yes didnt quite do much till they did the flash. I only have the free software, it does what I want it to do, read & clear alarms without doing the ignition on/off trick |
|
| Author: | KJ_andy [ Fri Apr 18, 2008 11:53 pm ] |
| Post subject: | |
Palla, You'll have to show me your box of tricks and see let me know if they give value or are just another thingy on the dash. Cheers Andy |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|