| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Lift or Bullbar? http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=93&t=39215 |
Page 1 of 1 |
| Author: | dirt pig [ Thu Jan 15, 2009 7:11 am ] |
| Post subject: | Lift or Bullbar? |
I've got an itch that I need to scratch badly. I'm going to throw some $$ at the KJ. I've decided to get a 2.5 inch lift and an ARB Bullbar, eventually. Only catch is, limited funds. So.... What should I do first? Bullbar then lift? or vice versa? Both are about the same price (Bullbar is ARB. Lift kit is OME) What would/should I get first? |
|
| Author: | mikey [ Thu Jan 15, 2009 7:26 am ] |
| Post subject: | |
If you go for the lift first, keep in mind the bar, as the extra weight will dictate the type of front coil bits you put in. M. |
|
| Author: | Fouros [ Thu Jan 15, 2009 8:56 am ] |
| Post subject: | |
and if your interested i might be able to steer you to a less than 1K TJM T17 Steel Bar |
|
| Author: | tommudd [ Thu Jan 15, 2009 9:04 am ] |
| Post subject: | |
A word from Ohio in the U.S. to properly run a bull bar you will need heavy duty springs, put one on stock suspension and you will be laying on the ground in no time, so I would Lift first Bull Bar next 
Of course what do we know over here? You mates are the true off roaders 
Tom |
|
| Author: | CD [ Thu Jan 15, 2009 5:20 pm ] |
| Post subject: | |
100% lift 1st, then the bull bar. I'd also contact CRDSTU, not ARB for your lift. |
|
| Author: | dirt pig [ Fri Jan 16, 2009 10:02 pm ] |
| Post subject: | |
Does CRDSTU have a website,shop or is he a privateer? I think I need a Pro to do this as I know little about Cherokee I'm down in Melbourne area!! |
|
| Author: | CD [ Sat Jan 17, 2009 2:25 am ] |
| Post subject: | |
dirt pig wrote: Does CRDSTU have a website,shop or is he a privateer?
I think I need a Pro to do this as I know little about Cherokee I'm down in Melbourne area!! Stu is a privateer but his gear is the best around, if your not keen to fit the goods then buy them from Stu and get a local shop to fit them. Do a search on LOST for OzLtd (that's Stu) or CRDSTU on AJOR, send him a PM and he should get back to you. Sorry but I can't find his email atm, it's on my work PC  .
|
|
| Author: | Glend [ Sat Jan 17, 2009 6:13 am ] |
| Post subject: | |
Dpig, I have PM'd you Stu's email address. |
|
| Author: | dirt pig [ Sat Jan 17, 2009 7:02 am ] |
| Post subject: | |
Thanks GlenD. You're a legend!! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|