| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| side steps http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=93&t=44803 |
Page 1 of 1 |
| Author: | MarkMc [ Tue Jul 07, 2009 6:24 am ] |
| Post subject: | side steps |
Where can I get some side steps from? (not rock sliders but to help my passengers get in) Dealer wants au$1200!!!! Note - they must ship to Australia Cheers Mark |
|
| Author: | Glend [ Tue Jul 07, 2009 7:02 am ] |
| Post subject: | |
Can you weld? A number of people have made their own for various Jeeps. Or you could PM Fouros and see if the SuperSkinks are available for the KK. |
|
| Author: | MarkMc [ Sat Jul 11, 2009 9:26 am ] |
| Post subject: | |
Glend wrote: Can you weld?
Thanks, I can sort of weld, but not too well... yet!!! I have a MIG at home but Father in law is the master with it. trouble is - he in in the UK. He did all the welding on my kit car, I knew I should have shoved him aside and had a go myself. 
|
|
| Author: | Glend [ Sat Jul 11, 2009 6:37 pm ] |
| Post subject: | |
You could do a search here on the various boards. Here is one with pics showing a guy making a KJ slider. http://www.lostjeeps.com/forum/phpBB3/vie ... ht=sliders I imagine if you measured it all up any good fabrication shop could knock it up for you fairly easily, and not to expensive (compared to bringing in these things for the US). |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|