It is currently Mon Apr 29, 2024 7:57 am

View unanswered posts | View active topics


Board index » Other LOST Local Forums » LOST Downunder

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
Glend
 Post subject: Closing the bigs holes in the engine bash plate?
PostPosted: Wed Oct 06, 2010 11:32 pm 
Offline
LOST Addict

Joined: Mon Oct 20, 2008 4:24 am
Posts: 1520
Location: Australia
Does anyone know why that big oval shaped hole is in the engine bash plate? It's sole purpose seems to be allowing mud to pack in between the engine and the bash plate. I want to weld some plate over it and close it up. Can anyone think of any reason not to?


Last edited by Glend on Thu Oct 07, 2010 2:44 am, edited 1 time in total.

Top
 Profile  
 
Fouros
 Post subject: Re: Closing the bigs holes in the engien bash plate
PostPosted: Thu Oct 07, 2010 1:59 am 
Offline
Forum Admin
Forum Admin
User avatar

Joined: Fri Jul 08, 2005 2:18 pm
Posts: 2210
Location: Gold Coast Australia
i know i can drain my oil through it and not have to remove my engine skid

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller
Top
 Profile  
 
DirtyKK
 Post subject: Re: Closing the bigs holes in the engien bash plate
PostPosted: Thu Oct 07, 2010 2:03 am 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
Fouros wrote:
i know i can drain my oil through it and not have to remove my engine skid


Yep
Top
 Profile  
 
Glend
 Post subject: Re: Closing the bigs holes in the engien bash plate
PostPosted: Thu Oct 07, 2010 2:44 am 
Offline
LOST Addict

Joined: Mon Oct 20, 2008 4:24 am
Posts: 1520
Location: Australia
No use on a CRD
Top
 Profile  
 
DirtyKK
 Post subject: Re: Closing the bigs holes in the engien bash plate
PostPosted: Thu Oct 07, 2010 3:50 am 
Offline
LOST Addict
User avatar

Joined: Thu Oct 29, 2009 5:59 pm
Posts: 2127
Location: Navarre FL
Glend wrote:
No use on a CRD


Well you could weld over it I suppose but I would put money on you still collecting plenty of mud.
Top
 Profile  
 
Team J.a.G
 Post subject: Re: Closing the bigs holes in the engien bash plate
PostPosted: Thu Oct 07, 2010 10:40 pm 
Offline
LOST Addict
User avatar

Joined: Mon Jun 18, 2007 6:13 am
Posts: 1010
Location: GOLD COAST
DirtyKK wrote:
Glend wrote:
No use on a CRD


Well you could weld over it I suppose but I would put money on you still collecting plenty of mud.


I generally drop mine down at every service or after a major sand or mud run, clean it out and get rid of that extra weight :SOMBRERO:

_________________
02KJ LTD
245x75Rx16 Hankook MTRT03
ARB Winch Bar,Tiger11 Winch,4xNarva spots,GME UHF,Navman GPS
Mopar Skid Plates,dual battery system,Tubular Jeep s/steps,
2.5" Lift OME Shocks & King Springs,AirFlow Snorkel
Long Range fuel Tank 115 Ltre,Drawer Unit
Rola:Roof Rails,Basket,Shovel Holders & Luggage Boot
Desert Edge Off Road Camper
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 6 posts ] 

Board index » Other LOST Local Forums » LOST Downunder

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 36 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com

Advertisements by Advertisement Management