Club Logo

pokefan · **Posted:** Thu Jun 28, 2007 9:42 am

I'd be more then happy to design a club logo if anyone is interested. I just think we need an identity.

Throw out some ideas and I'll try to get something going.

tulsa · **Posted:** Fri Jun 29, 2007 7:46 am

To me buffalo and the plains tribes identify the region.
Lewis

dieselenthusiast · **Posted:** Sat Jun 30, 2007 11:10 am

Let me ponder on some ideas. I’ll sketch a few ideas out and get back with you guys.

kjmurphy · **Posted:** Sat Jun 30, 2007 6:12 pm

We need some stickers too!!

SoDakJeep · **Posted:** Sat Jun 30, 2007 10:46 pm

haha i think it should be a mall and then a lost kjs logo hahaha we dont have many trails hahahahahahahahahaha but all kidding aside idk what to do haha

dieselenthusiast · **Posted:** Sat Jul 28, 2007 3:54 pm

Good luck with the LOGO, as I stated in the other GREAT PLAINS thread, Sarah and I have joined L.O.S.T. Rockies. We are so much closer to Colorado and the L.O.S.T. Rockies CLUB. I think Oklahoma should start their own Club as most of your guys are from OKC, Stillwater, and Tulsa which is rather close to each other. I’m not trying to ditch the GREAT PLAINS idea, I just think the amount of interest for the amount of square miles is hard to justify at this point in time. Realistically, Sarah and I can make it to Colorado Springs/Denver area once a month for trails runs and other Club functions.

BLANCK88 · **Posted:** Mon Sep 10, 2007 11:44 pm

I am new in Oklahoma. Just moved here from PA (midatlantic LOST) count me in
Bryan

skywarn · **Posted:** Mon Sep 17, 2007 5:03 pm

hey yall! yes i know my profile says im in Plano TX, which is where i live.. i just happen to work in downtown OKC M-F

Looking to meet up with someother LOST members...

I can make Stickers as well.... made my Avatar...

jsc7002 · **Posted:** Mon Sep 17, 2007 7:20 pm

we could meet and wheel in OK... on some sand dunes!

and id like a logo has anyone made a design yet?

dieselenthusiast · **Posted:** Mon Sep 17, 2007 10:45 pm

I have a few ideas.....................but I'm not sure how to get the hand drawings onto the computer.

jsc7002 · **Posted:** Mon Sep 17, 2007 10:49 pm

put them on paper and scan them... if you have a scanner

if not i do just mail them to me and ill post them for you

dieselenthusiast · **Posted:** Mon Sep 17, 2007 10:54 pm

jsc7002 wrote:

put them on paper and scan them... if you have a scanner

if not i do just mail them to me and ill post them for you

I have a scanner. Let me finish the drawings and get them posted, or send them to you.

pokefan · **Posted:** Thu Sep 20, 2007 10:23 am

jsc7002 wrote:

has anyone made a design yet?

Man, I've been swamped lately and haven't even had a chance to start on this. I don't really know where to go with it either.

Dieselenthusiast - Once you get these scanned I could probably help refine them some so we could get a sense of what they look like cut out of vinyl if you wouldn't mind.

jsc7002 · **Posted:** Thu Sep 20, 2007 10:47 am

i would try to make one but im not very good at drawing and i dont know where to start either

dieselenthusiast · **Posted:** Thu Sep 20, 2007 7:20 pm

pokefan wrote:

jsc7002 wrote:

has anyone made a design yet?

Man, I've been swamped lately and haven't even had a chance to start on this. I don't really know where to go with it either.

Dieselenthusiast - Once you get these scanned I could probably help refine them some so we could get a sense of what they look like cut out of vinyl if you wouldn't mind.

Hey Pokefan, most of my problems is trying to get the design to be conducive to vinyl cut-outs. By the time I get a design somewhat completed, I tend to find the flaws and chunk it in the trash. :evil:

A very vicious cycle! :twisted:

jsc7002 · **Posted:** Thu Sep 20, 2007 7:38 pm

dieselenthusiast wrote:

Hey Pokefan, most of my problems is trying to get the design to be conducive to vinyl cut-outs. By the time I get a design somewhat completed, I tend to find the flaws and chunk it in the trash. :evil:

A very vicious cycle! :twisted:

can you post some that you already made so we can get some ideas and maybe help you a out a lil bit

tulsa · **Posted:** Thu Sep 20, 2007 11:09 pm

Look at this link. "The End of The Trail" is what I think of when thinking of the plains. There are images on the net if you look around.

http://www.nationalcowboymuseum.org/g_trai_high.html
Lewis

jsc7002 · **Posted:** Fri Sep 21, 2007 1:13 pm

thats not a bad one but man theres a lot of detail that would have to go into it

pokefan · **Posted:** Fri Sep 21, 2007 2:16 pm

you could do a silhoutte of it and it would look pretty good. I'll sketch something up later and post it.

diesel - that's what I was saying it's hard to make something look good on vinyl. I can clean it up and make it work a little better if you have anything. I'm sure your designs are fine they just need to be tuned.

tulsa · **Posted:** Fri Sep 21, 2007 5:26 pm

Pokefan,
I think if you look around you can find a silhouette of the sculpture.

Lewis

Club Logo

Who is online