It is currently Sat Nov 28, 2020 4:14 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1776 posts ]  Go to page Previous  1 ... 85, 86, 87, 88, 89
Author Message
 Post subject: Re: DIY ECU Flash
PostPosted: Thu Jul 16, 2020 5:16 pm 
Offline
LOST Newbie

Joined: Tue Jul 10, 2007 8:49 pm
Posts: 16
Thank you now I see it.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Jul 29, 2020 12:36 pm 
Offline
LOST Newbie

Joined: Wed Jul 25, 2012 11:14 pm
Posts: 18
With GDE now unavailable to most of us, has anyone made an effort at a mpg improving tune?
Yeti would you be interested?


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Aug 02, 2020 3:49 pm 
Offline
LOST Newbie

Joined: Tue May 16, 2017 7:39 am
Posts: 17
Hey guys,

I converted my 05' crd to manual trans and it is all together except for the clutch position wire. (haven't looked up wiring yet). I just removed my GDE hot tune because they can't get me a manual transmission hot tune (EPA). I spoke with Marco and he needs my factory file to make me a tune. I flashed the truck back to stock today with the GDE tuner and it shows in software menu that I have original tune. I have mpps cable labeled v13 and the software is labeled mpps 13.02. Software version in lower right corner says 12.0.0.6. It sees system voltage but won't read any information from my ecu. When I close the program I get Mpps.exe application error. It says (The instruction at 0x000000000000002D referenced memory at 0x000000000000002D. The memory could not be read.) I thought maybe because the trans module was still plugged in so I disconnected that. Still no change. The cable drivers are installed so it shows up. I am on a current windows 10 version msi stealth pro laptop. Just need some advise. Please help. I want to get this truck back on the road. It's been sitting for a while now and I miss it.

I think I have all the needed information. Ask if you need any other info.

_________________
05 CRD Ltd new rockers, lifters, valves, arp's, weeks 1,2 Id silicone hoses full 3" exhaust, Carter intank pump, Hayden/GM fan 4”Lift Jba upper fronts, new front lowers, cut cv’s, bilsteins, 790’s, top plate, 2 conduit nuts, Iron Rock adjustable 3 link, custom diff bracket Jba 4” rear springs 16x8 rubi wheels 265/75 Yoko’s, manual tans/w231


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Aug 10, 2020 2:33 pm 
Offline
LOST Member

Joined: Fri Apr 17, 2020 12:07 am
Posts: 243
JohnnyCRDhead wrote:
Hey guys,

I converted my 05' crd to manual trans and it is all together except for the clutch position wire. (haven't looked up wiring yet). I just removed my GDE hot tune because they can't get me a manual transmission hot tune (EPA). I spoke with Marco and he needs my factory file to make me a tune. I flashed the truck back to stock today with the GDE tuner and it shows in software menu that I have original tune. I have mpps cable labeled v13 and the software is labeled mpps 13.02. Software version in lower right corner says 12.0.0.6. It sees system voltage but won't read any information from my ecu. When I close the program I get Mpps.exe application error. It says (The instruction at 0x000000000000002D referenced memory at 0x000000000000002D. The memory could not be read.) I thought maybe because the trans module was still plugged in so I disconnected that. Still no change. The cable drivers are installed so it shows up. I am on a current windows 10 version msi stealth pro laptop. Just need some advise. Please help. I want to get this truck back on the road. It's been sitting for a while now and I miss it.

I think I have all the needed information. Ask if you need any other info.

Sorry I can’t help with your software issues. Why can’t you keep the gde tune in this application? Also, I’m interested to know how you manual swapped it, which tranny did you choose and what were the challenges? I debated trying to do that but ended up bulletproofing my slush box instead and it’s a lot better than it was but I still struggle with driving autos and with this little sweetie engine a nice 5sp manual would be dreamy.

_________________
2005 crd limited, tinted, OME lift, falken wildpeak 245/75-16, Suncoast, Transgo, Chevy fan+clutch, 195° Stat, Derale tranny cooler, Provent, Stage 2 tune, EGRdelete, Cat delete, Viscous heater delete, V6 airbox, Tow package, tow brakes, switchblade key, DIY roof rack, Front bumper,
Future; rear bumper, true tracs, tank fuel pump, webasto heater


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Sep 13, 2020 4:35 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
BrianUnderwood wrote:
I've got an 06 with the GDE Hot Tune. Can I use this to download that tune and install it on my 05 offroad build???


you can't , without new checksum calculation , and only if you have the sme software number

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Sep 13, 2020 4:36 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
integrale wrote:
Hello, I just read my ECU and I see that I have version 813.
There is no Tune for this version?

I can do it , but contact me via email

Marco

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Sep 13, 2020 4:39 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
DrDirt wrote:
I've tried unsuccessfully twice to reflash using Dez's 035 stock tune but it doesn't remove the
EGR insufficiency flow fault.

Does anyone have any guidance or suggestions. Everything seemed to go fine otherwise.
Thank you for this great guide.


I can delete the dtc you need ;-)

plz contact me via email , I can't read daily the forum

Marco

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Sep 13, 2020 4:44 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
mike71800b wrote:
With GDE now unavailable to most of us, has anyone made an effort at a mpg improving tune?
Yeti would you be interested?



with an egr delete and power increase you can gain one km/lt or well 3 mpg , but not more

Marco

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Sep 13, 2020 4:48 am 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
JohnnyCRDhead wrote:
Hey guys,

I converted my 05' crd to manual trans and it is all together except for the clutch position wire. (haven't looked up wiring yet). I just removed my GDE hot tune because they can't get me a manual transmission hot tune (EPA). I spoke with Marco and he needs my factory file to make me a tune. I flashed the truck back to stock today with the GDE tuner and it shows in software menu that I have original tune. I have mpps cable labeled v13 and the software is labeled mpps 13.02. Software version in lower right corner says 12.0.0.6. It sees system voltage but won't read any information from my ecu. When I close the program I get Mpps.exe application error. It says (The instruction at 0x000000000000002D referenced memory at 0x000000000000002D. The memory could not be read.) I thought maybe because the trans module was still plugged in so I disconnected that. Still no change. The cable drivers are installed so it shows up. I am on a current windows 10 version msi stealth pro laptop. Just need some advise. Please help. I want to get this truck back on the road. It's been sitting for a while now and I miss it.

I think I have all the needed information. Ask if you need any other info.



it's seem compatibility driver and software problem with win 10 , have you disabled all security request from windows ?

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Oct 14, 2020 11:13 pm 
Offline
LOST Newbie

Joined: Wed Jul 25, 2012 11:14 pm
Posts: 18
Yeti wrote:
mike71800b wrote:
With GDE now unavailable to most of us, has anyone made an effort at a mpg improving tune?
Yeti would you be interested?



with an egr delete and power increase you can gain one km/lt or well 3 mpg , but not more

Marco

Yeti
Understood power gain plus mpg gain is limited.
I was thinking something different ... I would like a power decrease *** if *** the timing/fuel/boost mapping can be optimized for better mpg vs better torque.
I don't know enough about the various parameters on these engines to even begin to tinker trying to get mpg vs torque myself. I also understand GDE disabled the pilot injections and we aren't that deep into being able to reprogram that area of the ECM.
I seldom even hit half throttle stock 808 tune with dtc deletes. The 450nm tune would bring in too much tq converter shudder. I could drive around the shudder but the Mrs. could not. The 480nm tune in unuseable with so much shudder its almost impossible to stay out of the shudder zone.
PM me if you would like to play with an mpg tune I'll be glad to test and give some funding for the efforts.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Thu Oct 15, 2020 12:38 am 
Offline
LOST Newbie

Joined: Mon Dec 14, 2009 2:10 am
Posts: 1
Location: Washington
Bear with me In new to posting.. Have 2006 with 516 map. Anyone tell me how to save the DTC516.txt, from hrastprogrammer, in WinOLS? Edited in Notepad++ and set the P0101 P0101, P0103 P0102, and P1140 P2142 = 0. When I attempt to import it into a project, after dropping in my original map, which works great, I get EPROM Error - probably a data line was defect? Would really want a hot tune for it as the transmission has the transgo shift kit, Euro TC, and is solid.

Thanks!

_________________
05/Weeks/Provent/Euro Lifters/Rockers/ARP studs/Nick's 811 EGR/FCV delete + Stage 1 tune (vers 1.01)-bought used & rebuilt
06 Liberty/3" OME lift/Provent/Euro Lifters/Rockers/ARP studs/much other stuff-no tune because it's 516-bought new


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Oct 18, 2020 9:08 am 
Offline
LOST Newbie

Joined: Mon Oct 21, 2019 9:03 am
Posts: 7
Hello friends.

Maybe I can help someone ...

I searched for this file before ... and found it!

Jeep Grand Cherokee 2.7 CRD (WJ) {SW: 094-704}

EGR - disabled.

Use it!

Download:

https://dropmefiles.com/hJBxG


Last edited by yuri.skoreiko on Tue Oct 27, 2020 11:14 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Oct 18, 2020 1:08 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
molson57 wrote:
Bear with me In new to posting.. Have 2006 with 516 map. Anyone tell me how to save the DTC516.txt, from hrastprogrammer, in WinOLS? Edited in Notepad++ and set the P0101 P0101, P0103 P0102, and P1140 P2142 = 0. When I attempt to import it into a project, after dropping in my original map, which works great, I get EPROM Error - probably a data line was defect? Would really want a hot tune for it as the transmission has the transgo shift kit, Euro TC, and is solid.

Thanks!


becuase is not a mappack , follow the addres ans set it to zero

By the way I have sent a pm

Marco

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Oct 18, 2020 1:11 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
yuri.skoreiko wrote:
Hello friends.

Maybe I can help someone ...

I searched for this file before ... and found it!

Jeep Grand Cherokee 2.7 CRD (WJ) {FW: 094-704}

EGR - disabled.

Use it!

Download:

https://dropmefiles.com/GJzLa


sincerelly ..... is not KJ related

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Nov 04, 2020 5:19 pm 
Offline
LOST Newbie

Joined: Tue Feb 06, 2018 10:03 am
Posts: 52
mike71800b wrote:
Yeti wrote:
mike71800b wrote:
With GDE now unavailable to most of us, has anyone made an effort at a mpg improving tune?
Yeti would you be interested?



with an egr delete and power increase you can gain one km/lt or well 3 mpg , but not more

Marco

Yeti
Understood power gain plus mpg gain is limited.
I was thinking something different ... I would like a power decrease *** if *** the timing/fuel/boost mapping can be optimized for better mpg vs better torque.
I don't know enough about the various parameters on these engines to even begin to tinker trying to get mpg vs torque myself. I also understand GDE disabled the pilot injections and we aren't that deep into being able to reprogram that area of the ECM.
I seldom even hit half throttle stock 808 tune with dtc deletes. The 450nm tune would bring in too much tq converter shudder. I could drive around the shudder but the Mrs. could not. The 480nm tune in unuseable with so much shudder its almost impossible to stay out of the shudder zone.
PM me if you would like to play with an mpg tune I'll be glad to test and give some funding for the efforts.




Malone Tuning in Canada still does tunes but they are a bit pricey.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Nov 20, 2020 4:58 pm 
Offline
LOST Newbie

Joined: Tue Feb 06, 2018 10:03 am
Posts: 52
I have a 2006 and just downloaded the GDE ECO tune that is one it. This is the number that shows in wordpad.
1037512035P53363K0

Any idea on what YETI version tune to use? Seems it doesnt elude to one thats in the list.

THanks
Dan


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1776 posts ]  Go to page Previous  1 ... 85, 86, 87, 88, 89

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com