LOST JEEPS
http://www.lostjeeps.com/forum/phpBB3/

Anti-mouse Intake Screen Mod (AMM)
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=34608
Page 1 of 1

Author:  Biohazard KJ CRD [ Thu Jul 31, 2008 3:46 am ]
Post subject:  Anti-mouse Intake Screen Mod (AMM)

I live in the country; mice are an issue. When I discovered a nest in my air intake box I decided to install a screen. I used 1/4" x 1/4". It's small enough to keep mice out, but not as flow restricting as window screen.

1. Remove intake port.
2. Cut screen slightly larger than opening.
3. Press into existing groove.
4. Re-install intake port.

Image

Author:  ATXKJ [ Thu Jul 31, 2008 7:46 pm ]
Post subject: 

FYI -we've also had a couple of folks who had rabbit/ mouse damage to wiring harnesses - it sounds like there's a vegetable oil (peanut?) used in the wiring loom assembly process.

I don't know how you'd screen that.

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=31635&highlight=peanut+oil
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=25087&highlight=peanut+oil

Author:  gmctd [ Fri Aug 01, 2008 12:20 am ]
Post subject: 

Good idea - can use the screen from the air filter when you replace it - just strip the screen outta the foam, cut to size, form to fit, pop-rivet, and yer good to go - been on my GMC 6.5TD for years, same problem: rodent motel

Author:  Bushman5 [ Wed May 17, 2017 1:32 am ]
Post subject:  Re:

ATXKJ wrote:
FYI -we've also had a couple of folks who had rabbit/ mouse damage to wiring harnesses - it sounds like there's a vegetable oil (peanut?) used in the wiring loom assembly process.

I don't know how you'd screen that.


http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=31635&highlight=peanut+oil
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=25087&highlight=peanut+oil


you can borrow my big TomCat PipSqueak.......a little spray of his urine on all the wires and no mouse or rat for ten miles will dare come around..... :ROTFL: :ROTFL: :ROTFL:

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/