| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Replace the front diff drain plug o-ring http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=65120 |
Page 1 of 1 |
| Author: | Squeeto [ Thu Feb 09, 2012 1:54 pm ] |
| Post subject: | Replace the front diff drain plug o-ring |
The front diff drain plug: I believe that Jeep just sells this as a unit. (Edit: Mopar part number for just the o-ring is 5066055AA.) If the threads look good, just replace the o-ring if needed.   You need a 70 or 75 durometer Viton, polyacrylate (ACM) or nitrile (NBR, Buna-N) rubber o-ring. It should be a standard AS568-114 (5/8 x 3/32) or metric 2.5 x 15.5mm. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|