The reading on did on shrouds said they should be a minimum of 1" deep to be efficient, so that's what I built. For what it's worth
| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| Electric Fan alternatives for mechanical fan http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=77542 |
Page 2 of 2 |
| Author: | Mountainman [ Sun Jun 12, 2016 7:11 pm ] |
| Post subject: | Re: Electric Fan alternatives for mechanical fan |
The reading on did on shrouds said they should be a minimum of 1" deep to be efficient, so that's what I built. For what it's worth
|
|
| Author: | thermorex [ Tue Jun 14, 2016 11:33 am ] |
| Post subject: | Re: Electric Fan alternatives for mechanical fan |
Makes sense, since otherwise is like you just install the fan on the radiator w/o shroud. The ffdynamics does not have an inch deep in shroud, and you can't install a fan + over 1/2in shroud, there is no space w/o touching the engine components. Unless you strip the accessories like you did anyways... |
|
| Author: | mass-hole [ Thu Jun 16, 2016 1:03 am ] |
| Post subject: | Re: Electric Fan alternatives for mechanical fan |
I did see that FFDynamics has the same fan as comes in this kit(FFD3600) but at 3000 cfm(FFD16). Looks to be the same fan assembly with a smaller motor. It's about an inch shallower at the motor which may open up some free space. I know that the FFD3600 already apparently moves less air than the stock mech fan but mine doesn't even work and I get by fine. Sent from my Nexus 6 using Tapatalk |
|
| Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|