It is currently Tue Oct 27, 2020 5:06 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 1774 posts ]  Go to page Previous  1 ... 67, 68, 69, 70, 71, 72, 73 ... 89  Next
Author Message
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 6:43 pm 
Offline
LOST Member

Joined: Thu Feb 16, 2017 10:46 pm
Posts: 108
Location: Pinedale, Wyoming
For those of you, that want the Mild 808 Yeti Tune, Mild Nicks 808 Tune or Stock 808 Tune with P0403,P1140 Deleted, Follow the link here.

If you decide to download Yetis or Nicks tune, Please send them a PM Thanking them for their work. Ive only went through and removed DTC's based off the How-To written on the forum, using the public tunes already posted :)

https://drive.google.com/open?id=1K0odg ... bYbnZt1ZqW


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 9:14 pm 
Offline
LOST Newbie

Joined: Mon Sep 05, 2016 8:24 pm
Posts: 48
Ok went to O'Reiliey's and the codes that came up was the Exhaust Gas Recirculation Throttle Control Circuit Open. It was brutally cold out, and I asked the guy if he could get me the numbers. He was standing out in 6* weather in a short sleeve shirt. He was struggling to get back to where he was. He finally does, and the first one was the P1140, but I guess the cold got us all not straight thinking and I forgot to ask him to go to the second one.

_________________
Check out my CRD videos on my Youtube page - https://www.youtube.com/user/Str8sixfan ... subscriber


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 9:27 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4924
Location: Green Cove Springs FL
Probably a p0403.
Did he clear the codes? That’s probably the most important part.
Clear the codes and see if they return. If those two codes do return, there is a problem with your tune.

You are going to have to get your own code reader. Not sure how you have survived this long without one. If you already have a android phone/tablet, a ELM327 Bluetooth and TorquePro app is the most cost effective.
(Even if you don’t already have one, Android tablets are pretty cheap these days)

_________________
Provent, intake elbow, and EGR delete. 5 volt bosch glow plugs
Yeti stage 4 ECU tune. Straight pipe exhaust. DIY intercooler hoses.
Aftermarket intercooler
Fixed Flex Fan and modified factory 190F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 10:04 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
Str8sixfan

Check my last post regarding the DTC condition. My post is absolutely accurate as it applies to the 2006 '808' tunes.

The comments about having all the DTCs eliminated are all from those using the 2005 '811' tunes. Not 808 tunes.

They Are Different.

If 808 DIY tunes have been modified for all DTCs to be eliminated, they are not saved among the ones available on this page.

Personally, I'm finding it worthwhile to get a completely custom tune, exactly the way I want it.

Image

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 10:10 pm 
Offline
LOST Newbie

Joined: Mon Sep 05, 2016 8:24 pm
Posts: 48
GordnadoCRD wrote:
Str8sixfan

Check my last post regarding the DTC condition. My post is absolutely accurate as it applies to the 2006 '808' tunes.

The comments about having all the DTCs eliminated are all from those using the 2005 '811' tunes. Not 808 tunes.

They Are Different.

If 808 DIY tunes have been modified for all DTCs to be eliminated, they are not saved among the ones available on this page.

Personally, I'm finding it worthwhile to get a completely custom tune, exactly the way I want it.

Image


They did try to clear the codes and they came back. The tune is good. While my impressions yesterday seemed like they were next to nothing, I certainly noticed better acceleration today.

I see now. 2005s used 811s, 2006s used 808s. And to date no one necessarily has had an 808 tune to eliminate all of the DTCs. My objective honestly is to get it off and put it up for sale.

Ironically by me getting all DTCs to go off is probably more dishonest to a buyer than keeping the CEL on and explaining to them the why it's on. But I feel like if I keep the CEL and tell the prospective buyer that it's only on because of the EGR delete, they'll think that I'm trying to cover something else up.

_________________
Check out my CRD videos on my Youtube page - https://www.youtube.com/user/Str8sixfan ... subscriber


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 10:13 pm 
Offline
LOST Addict

Joined: Fri Jun 22, 2007 11:43 am
Posts: 4924
Location: Green Cove Springs FL
Scroll up and read the post from Dez.

_________________
Provent, intake elbow, and EGR delete. 5 volt bosch glow plugs
Yeti stage 4 ECU tune. Straight pipe exhaust. DIY intercooler hoses.
Aftermarket intercooler
Fixed Flex Fan and modified factory 190F thermostat
Replaced cylinder head (cracked) at 160,000 miles + ARP studs
2.5 inch lift, JBA upper arms, 235-85-16 tires.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 10:19 pm 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
It's seems to me, more likely that you would lose sales opportunities due to the fact many states won't allow licensing with a CEL on condition.
You're limited to people who are familiar and experienced with this specific vehicle and willing to do the work or have it done.
I believe if you fix the DTC condition, and explain to the buyer that the EGR problems have been fixed, including the resulting DTC condition, your potential customer base would be larger.


Edit: Flash: I did notice Dez's post, and it makes my point. If you want a DIY tune for a 2006 CRD that has all of the DTC's eliminated, it's not found in this thread. Having them linked is a big help.

I am very grateful for all of the time and effort taken by those who have been able and willing to invest themselves in making these tunes available to those of us who are not able.

I am also grateful for the finessed commercially available offerings from GDE, even though it's a tiny market segment we represent.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Mon Jan 15, 2018 11:22 pm 
Offline
LOST Newbie

Joined: Mon Sep 05, 2016 8:24 pm
Posts: 48
GordnadoCRD wrote:
This one:

I used the original EGR solenoid unbolted from the rest of the contraption, and the loom connector plugged in.



I just tried this. Still have CEL, but would it have to be cleared now that I have it plugged back in? I did disconnect the battery before plugging in. Also KS has no licensing issues with a CEL. Missouri likely has more of those issues to deal with, and since I'm near KC is half of my market pool. Like I said, my preference is to sell it without a CEL on.

_________________
Check out my CRD videos on my Youtube page - https://www.youtube.com/user/Str8sixfan ... subscriber


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 16, 2018 12:19 am 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
Yes, I had to clear mine with a scanner tool after hooking the solenoid up.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 16, 2018 3:55 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
flash7210 wrote:
r1perk wrote:
Please correct me if I am wrong. I have a GED tune on one of my jeeps. It always shows a P0403 on the scanner, but does not show a engine light.

On another Jeep I just deleted the EGR and the FCV and uploaded one of the tunes from here. It has a light but from other codes that are not related to the delete function. Still trying to sort out the other codes.

With the tune the codes will always be there but not turn on the light.

I am I correct in thinking this is the way the tunes work?

My wife’s 06 has a full EGR delete and a GDE tune.
No check engine light and no codes for EGR on hers.

My 05 has a full EGR delete and a Yeti 811 tune.
No codes for EGR or FTV.

If your GDE tune is still showing codes for EGR, you may want to contact GDE to see if they can fix that for you.

If your DIY tune is showing EGR codes, you may want to contact Yeti or Dez about fixing it for you.



if is DIY I think people study and apply what they have learned ;-)

if not , contact me , but is my work

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Wed Jan 17, 2018 1:20 am 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
Yeti wrote:
if is DIY I think people study and apply what they have learned ;-)

if not , contact me , but is my work

^^^^^^^^^^^^^ Worth it! ^^^

It seems many people get to the "free" part, and skip the DIY part.

Don't get me wrong, Free is Great! I love Free!

And for those that have the skills / knowledge and want to share their work, that's awesome!

For me, I had very specific wants, but no ability. It made sense to work with Yeti.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Fri Jan 26, 2018 11:06 pm 
Offline
LOST Newbie

Joined: Sun Mar 23, 2014 10:28 pm
Posts: 2
Dez wrote:
For those of you, that want the Mild 808 Yeti Tune, Mild Nicks 808 Tune or Stock 808 Tune with P0403,P1140 Deleted, Follow the link here.

If you decide to download Yetis or Nicks tune, Please send them a PM Thanking them for their work. Ive only went through and removed DTC's based off the How-To written on the forum, using the public tunes already posted :)

https://drive.google.com/open?id=1K0odg ... bYbnZt1ZqW


I am an extreme newbie, but can you tell me if these tunes are compatible with 7v glow plugs.
Thanks


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Jan 27, 2018 3:38 am 
Offline
LOST Addict
User avatar

Joined: Sat Aug 27, 2016 9:12 pm
Posts: 2506
Location: Oregon Coast Dairy Country. Land of stumps, dumps, and "Liquid Pumps"
compatible with both, in my experience.

_________________
'06 Lbrty Sprt CRD 150K

Sasquatch
DSS Turbo
CAT-elimntr
Weeks Stg1&2 EGRfix
PV-200
BLING
vent gauges

IDParts
head
cams
rockers
Timing set
ARP studs
eTn1 GX2123 5v GPs

YETI Custom Tune
Flowmaster 8325508
Carter P76611M
GM 12611872
Hayden 2986
GM 15976889
PATC Custom Billet
2010 Ram Hemi Trans
Sonnax 44957
Transgo kit
Cooper 51770


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sat Jan 27, 2018 12:18 pm 
Offline
LOST Member

Joined: Thu Feb 16, 2017 10:46 pm
Posts: 108
Location: Pinedale, Wyoming
Yes, it will work, my Jeep is on 7 volts with yeti 808 tunes :)


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 30, 2018 1:49 am 
Offline
LOST Member
User avatar

Joined: Thu Oct 05, 2017 2:22 am
Posts: 394
Logging on to easily find this topic. 77 pages is a lot to read.

_________________
2005 Jeep Liberty 2.8L CRD 248
Kona, Hawaii (Big Island) USA

Changed Turbo.
100,000-mile service.
Replaced harmonic balancer.
Noise in front axle or 3rd member - removed loose chain in transfer case.
Rebuilt engine - replaced #3 cylinder, piston, valves, head repair. Removed EGR.
Sheared bolts on TC. Replaced flex plate, TC, bolts.


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 30, 2018 2:11 pm 
Offline
LOST Addict
User avatar

Joined: Tue Jun 04, 2013 1:21 pm
Posts: 2137
Location: Utah
CaptainDean wrote:
Logging on to easily find this topic. 77 pages is a lot to read.


You really dont need to read most of it. If you are looking for the hows and whys, thats the first few pages. If you are looking to actually tune your own jeep I would suggest these threads:

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=84932

http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=83743

_________________
2006 CRD - GTB2056 turbo by Dieselguy86, Eco Trans Tune, Lift Pump, Week's, HDS Tstat, Racor Filter, ARP's, OME 790's+Top Plate, JBA 2.5", JBA UCA, Moab's+265/75R16, ARB Bull Bar, 4.10's, TrueTracs


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Tue Jan 30, 2018 4:10 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
great :wink:

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Feb 04, 2018 12:52 pm 
Offline
LOST Newbie

Joined: Sat Feb 03, 2018 6:44 am
Posts: 7
Need to try... I have mpps version 16

Works in win 10 with xp-emulation on.

Quite noob but I have 2003 CRD european version here in Finland


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Feb 04, 2018 1:55 pm 
Offline
LOST Junkie
User avatar

Joined: Sat Jul 11, 2009 4:17 pm
Posts: 852
Location: Biella Italia
work on it if is a clean install

_________________
ECU Tuner -EGR OFF -DPF OFF Swirl/Flap OFF, Lambda OFF , DTC OFF in many cars , not ONLY Jeep


Top
 Profile  
 
 Post subject: Re: DIY ECU Flash
PostPosted: Sun Feb 04, 2018 2:08 pm 
Offline
LOST Newbie

Joined: Sat Feb 03, 2018 6:44 am
Posts: 7
Yeti wrote:
work on it if is a clean install


Have to try some day and read the ecu and find out what version is in my Jeep...

Today was -20 degrees celsius so it was not very pleasure to be outside :lol: And I had to change battery to our multivan... old battery died because this cold weather.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1774 posts ]  Go to page Previous  1 ... 67, 68, 69, 70, 71, 72, 73 ... 89  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com