DIY ECU Flash

UncleBarJude · **Posted:** Fri May 15, 2015 4:21 pm

Anyone able to help with this fix for my 526 map?

Yeti · **Posted:** Sat May 16, 2015 3:10 am

at page 24 is described how to delete the DTC in your ECU

pjigar · **Posted:** Thu May 21, 2015 10:54 am

I just read flash from my ECU and I get software version 1037375617. I have 2006 American CRD 2.8. I am assuming I have 617 software based on the terminology on this thread.

Dumb question: Can I upload "Nick's 808" or "Yeti's 808" in my car? Or do I have to copy the maps from their software into my original dump? How about the DTC codes? We only know DTC code locations for 513, 516, 526, 808, 809, 811 and 812 so far. Is there any way for me to find the DTC code location for my 617 dump?

Here is my flash dump FYI: https://www.dropbox.com/s/x4etfo39b17xq ... 75617?dl=1

Here is the ECU ID Info:
https://www.dropbox.com/s/mxdchp57jq0h04w/ECU_Info.png

Thanks

Yeti · **Posted:** Fri May 22, 2015 5:12 am

your file is a 601 ......and have a different parameter for fuel quantity injected from MAF reading .....more than other, BTW is near the same of the 809 file and you can copy the parameter of this file or make a Frankenstin from other map that present the same value

and have identical dtc map of the 809

ChiefJames · **Joined:** Tue May 12, 2015 8:28 am **Posts:** 1

Hi I am new to this I have a crd ordered Egr bypass need to know what all I need to reprogram jeep I have a apple lap top will I be able to use it all help is appreciated . Thanks just James

Squeeto · **Posted:** Sun May 24, 2015 5:12 pm

ChiefJames wrote:

Hi I am new to this I have a crd ordered Egr bypass need to know what all I need to reprogram jeep I have a apple lap top will I be able to use it all help is appreciated . Thanks just James

Best that I can suggest:

Squeeto wrote:

mako231 wrote:

I want to make sure that the drivers and software will be compatible with a MAC.

You could run a Windows emulator for Mac like VirtualBox.
VirtualBox is free and you can download a legitimate free version of Windows7 that gives you a 30 day trial.

There are ways to extend or renew the 30 days each time you need it too.

If you find a better option, post it here.

Squeeto · **Posted:** Sun May 24, 2015 6:17 pm

pjigar wrote:

I just read flash from my ECU and I get software version 1037375617. I have 2006 American CRD 2.8. I am assuming I have 617 software based on the terminology on this thread.

Dumb question: Can I upload "Nick's 808" or "Yeti's 808" in my car? Or do I have to copy the maps from their software into my original dump? How about the DTC codes? We only know DTC code locations for 513, 516, 526, 808, 809, 811 and 812 so far. Is there any way for me to find the DTC code location for my 617 dump?

Here is my flash dump FYI: https://www.dropbox.com/s/x4etfo39b17xq ... 75617?dl=1

Here is the ECU ID Info:
https://www.dropbox.com/s/mxdchp57jq0h04w/ECU_Info.png

Thanks

Open this up with Titanium (or Wordpad); you have an 808.

Yeti · **Posted:** Mon May 25, 2015 2:40 pm

guys I need a ecu file with 5v GP and I reward this file with a personalized tune

thanks

Squeeto · **Posted:** Mon May 25, 2015 3:49 pm

Yeti wrote:

guys I need a ecu file with 5v GP and I reward this file with a personalized tune

thanks

I am currently working on this for you.
If I get a 5volt tune I will pass it on and the gents name; you could help him with a personalized tune.
Maybe if he reads this post, he can send it to you directly.

But, I would also like to know how the gp voltage information is stored so I can update the information on this thread.

Yeti · **Posted:** Tue May 26, 2015 1:18 pm

Squeeto wrote:

Yeti wrote:

guys I need a ecu file with 5v GP and I reward this file with a personalized tune

thanks

I am currently working on this for you.
If I get a 5volt tune I will pass it on and the gents name; you could help him with a personalized tune.
Maybe if he reads this post, he can send it to you directly.

But, I would also like to know how the gp voltage information is stored so I can update the information on this thread.

many many thanks Squeeto , my jeep eat the gp like a candy , the system is in order , but I have a gp failure every 3-4 months , if I can do the comparison with the 5v and 7v I can try to study it and modify at my need , now the temp is min 5-6 degree celsius and the max is about 14 , last week have snowed a little and at first crank ...........blimm...... horrible sound and flash light come on with a 2° gp died :banghead:

if I can found the map I post the address and what you need , for what I have understand the ecu control only the time with a pulse and the module give and take the tension at the GP no matter the code you have on the GCU , a bosch code is one and little tolerance , which may have , can not make a difference

my :2cents:

I have tried to put a 11v , but in the winter you must cycle 3-4 time at -15-20° C and the engine run rough if I can Increment the time I think the 11v become eternal as it should be

mass-hole · **Posted:** Tue May 26, 2015 3:00 pm

txbiker wrote:

Finally got my shipment on slowboat from china. When I open the file, it asks for MPPS version and serial no. Where do I get this info and is it important? I am hoping the MPPS cable will connect with my NON-OBDII Libby. If not, do I have any options?

Thanks

My cd several versions of the software and the latest asked me as well. I just used one of the older versions and it worked.

Edit: hate tapatalk, it put me on page 46 of 54 by default. . ..

flash7210 · **Posted:** Wed May 27, 2015 8:59 am

I'm running the Yeti 811 Stage 2 now. Loaded it yesterday.
Works really good.
Have to take it easy though. Otherwise I get some TC shudder.

Yeti · **Posted:** Wed May 27, 2015 10:29 am

try to put original the TC map that star at address 0E6F00 and ends at .. 0E701E , hope that help

Yeti · **Posted:** Wed May 27, 2015 1:43 pm

is a possible GP map ?

I overlying the 617....808 with a 809 map there is the possibility that the map of pre-glow ?

sorry the map is early the overboost map

pjigar · **Posted:** Wed May 27, 2015 3:18 pm

Squeeto wrote:

pjigar wrote:

I just read flash from my ECU and I get software version 1037375617. I have 2006 American CRD 2.8. I am assuming I have 617 software based on the terminology on this thread.

Dumb question: Can I upload "Nick's 808" or "Yeti's 808" in my car? Or do I have to copy the maps from their software into my original dump? How about the DTC codes? We only know DTC code locations for 513, 516, 526, 808, 809, 811 and 812 so far. Is there any way for me to find the DTC code location for my 617 dump?

Here is my flash dump FYI: https://www.dropbox.com/s/x4etfo39b17xq ... 75617?dl=1

Here is the ECU ID Info:
https://www.dropbox.com/s/mxdchp57jq0h04w/ECU_Info.png

Thanks

Open this up with Titanium (or Wordpad); you have an 808.

Thanks you. I see it! It says 1037380808 in the first line.

pauly73 · **Joined:** Tue Apr 28, 2015 8:23 pm **Posts:** 1

Help can anyone retune a 518 file with egr and fcv delete for kj in australia. Any help would be great.

Paul

Yeti · **Posted:** Sun May 31, 2015 2:03 pm

Hi Paul , for the FCV select this address 0E1E50 to 0E1FCE this is the FCV map , put first at zero all value in this map and after increase it at the original max value 17049

for the egr map select the two hump that starting at 0E275C and 0E27C2 AND ENDING AT 0E2778 and 0E27DE and put to zero the value

tomasnc · **Posted:** Sun May 31, 2015 11:53 pm

I have a '05 with Bosch EDC16C/C2-9.9 and a file no. 1037375603

Suggestions please for a tune? the 5603 seems to be somewhat rare or I'm I missing something?

Thanks,

Tom

Yeti · **Posted:** Mon Jun 01, 2015 3:31 am

but is a 150 HP ? if yes , sorry I have no experience

tomasnc · **Posted:** Mon Jun 01, 2015 5:18 am

Yeti,

Is the 150HP correct?
Why so low for a USA car?

DIY ECU Flash

Who is online