LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
DIY ECU Flash http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=78418 |
Page 80 of 93 |
Author: | WWDiesel [ Mon Jan 07, 2019 11:17 am ] |
Post subject: | Re: DIY ECU Flash |
michaldenisiuk wrote: YETI, yesterday MPPS V13.02 arrived, thats what I get from my ECU always 402 EGR issue occure Chrysler Voyager 2.8CRD 150HP 2007 BOSCH EDC15C2 Yeti wrote: p0402 is for stuck open egr you need to block the valve with a plate See this for making a block off plate:> viewtopic.php?f=5&t=76576 |
Author: | perthcheetah [ Wed Jan 23, 2019 6:19 am ] |
Post subject: | Re: DIY ECU Flash |
Hi All Thanks for the great info/help so far I have the 525 file - original - see dropbox link - from my Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0 Was wondering if anyone can edit the file and remove EGR/FCV for me please or let me know where in ECU Titanium i can edit these two feel free to add this file to the original list or copies of it. Thank you Clyde |
Author: | WWDiesel [ Wed Jan 23, 2019 12:49 pm ] |
Post subject: | Re: DIY ECU Flash |
perthcheetah wrote: Hi All Thanks for the great info/help so far I have the 525 file - original - see dropbox link - from my Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0 Was wondering if anyone can edit the file and remove EGR/FCV for me please or let me know where in ECU Titanium i can edit these two feel free to add this file to the original list or copies of it. Thank you Clyde Contact (PM) Yeti on this forum |
Author: | perthcheetah [ Tue Jan 29, 2019 1:37 am ] |
Post subject: | Re: DIY ECU Flash |
Thank you, Will send Yeti a PM.. |
Author: | tojedasr [ Fri Feb 01, 2019 2:28 pm ] |
Post subject: | Re: DIY ECU Flash |
Anyone have a tune for 617 ECU? |
Author: | Yeti [ Sun Feb 03, 2019 2:40 pm ] |
Post subject: | Re: DIY ECU Flash |
I Can do it for every ecu and sw number |
Author: | VardFriki [ Tue Feb 05, 2019 5:15 am ] |
Post subject: | Re: DIY ECU Flash |
Hi fellas, I'm new and have been searching for an ecu egr delete for a JK Wrangler petrol 3.8 v6. Can anyone point me in the right direction please. sorry for intruding. Cheers from New Zealand Mud. |
Author: | Yeti [ Tue Feb 05, 2019 6:06 am ] |
Post subject: | Re: DIY ECU Flash |
VardFriki wrote: Hi fellas, I'm new and have been searching for an ecu egr delete for a JK Wrangler petrol 3.8 v6. Can anyone point me in the right direction please. sorry for intruding. Cheers from New Zealand Mud. egr delete on 3.8 v6 ? is the first time I hear problem in a gasoline |
Author: | My66dodge [ Tue Feb 05, 2019 9:32 am ] |
Post subject: | Re: DIY ECU Flash |
Egr is not a problem on gasoline powered rigs, it is used as an octane boost so to speak, without egr the in cyl's temps get higher and you have to either pull back timing or re tune to add more fuel and switch to a higher octane. The old Toyota v6 that use to crack heads and blow gaskets, I found the problem to be a non properly functioning egr. |
Author: | Squeeto [ Fri Mar 08, 2019 1:28 pm ] |
Post subject: | Re: DIY ECU Flash |
CaptainDean wrote: Great, will add link to the first page. perthcheetah wrote: 525 file - Chrysler Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN - manual gearbox https://www.dropbox.com/s/6h1bttrjcx54v ... 7.Bin?dl=0 .. feel free to add this file to the original list or copies of it. Clyde Thx for the addition. I will update the first page soon. |
Author: | Squeeto [ Fri Mar 08, 2019 1:47 pm ] |
Post subject: | Re: DIY ECU Flash |
Squeeto wrote: perthcheetah wrote: 525 file .. manual gearbox Thx for the addition. I will update the first page soon. As far as I know, the .bins have both manual and automatic transmission tables (maps). Yeti (or anyone) is the tune for an automatic different from a manual or does the transmission controller tell the ecu which map to use? |
Author: | Yeti [ Fri Mar 08, 2019 4:45 pm ] |
Post subject: | Re: DIY ECU Flash |
Squeeto wrote: Squeeto wrote: perthcheetah wrote: 525 file .. manual gearbox Thx for the addition. I will update the first page soon. As far as I know, the .bins have both manual and automatic transmission tables (maps). Yeti (or anyone) is the tune for an automatic different from a manual or does the transmission controller tell the ecu which map to use? there is only 7 torque limiter ..automatic or manual , and change in torque management and torque permitted during shifting ,plus different gear ratio for every gear and DTC table for automatic transmission |
Author: | Squeeto [ Fri Mar 08, 2019 9:55 pm ] |
Post subject: | Re: DIY ECU Flash |
What I mean to ask is will perthcheetah's 525 bin file work on both automatic and manual transition vehicles? I think that it will but I just want to be sure. |
Author: | jimsult [ Sat Mar 09, 2019 4:10 pm ] |
Post subject: | Re: DIY ECU Flash |
Hi Yeti I had purchased the weeks stage 1 and 2 kit from Seth back in August. I am just getting to install it next week march 12. I noticed the kit is no longer available but dont see any reason not to install it. My question to you is am I best to go with the DIY ecu flash after doing this kit? I have trouble with the FCV and this is reason for doing the kit. One last question is do I have to order the cable on ebay from China? take a while. Thanks for any help Jim 2006 Liberty CRD |
Author: | Yeti [ Sat Mar 09, 2019 4:20 pm ] |
Post subject: | Re: DIY ECU Flash |
jimsult wrote: Hi Yeti I had purchased the weeks stage 1 and 2 kit from Seth back in August. I am just getting to install it next week march 12. I noticed the kit is no longer available but dont see any reason not to install it. My question to you is am I best to go with the DIY ecu flash after doing this kit? I have trouble with the FCV and this is reason for doing the kit. One last question is do I have to order the cable on ebay from China? take a while. Thanks for any help Jim 2006 Liberty CRD most of the free tune here have not the dtc delete and is a sketch to spur people to studie and DIY , if you want a custom tuned file that can take care of the transmission etcc and completly delete the EGR and FCV contact me in PM here or on my FaceBook page , you can finde the mpps cable on ebay or amazon for a fast shipping |
Author: | Yeti [ Sat Mar 09, 2019 4:24 pm ] |
Post subject: | Re: DIY ECU Flash |
Squeeto wrote: What I mean to ask is will perthcheetah's 525 bin file work on both automatic and manual transition vehicles? I think that it will but I just want to be sure. not sure , probably if you load a manual transmission in automatic you have problem and error , if you load an automatic transmission file in a manual .....and you do not know how to edit the torque management............you lose power due to the high limitation in automatic trans file |
Author: | Squeeto [ Sat Mar 09, 2019 7:11 pm ] |
Post subject: | Re: DIY ECU Flash |
Okay, no problem. Easy question to answer if a 525 automatic bin makes it my way. For now I will just make a note of this on the first page. |
Author: | jimsult [ Mon Mar 11, 2019 7:48 pm ] |
Post subject: | Re: DIY ECU Flash |
just got new MPPS v13 cable, downloaded drivers and windows 10 sees it fine Installed MPPS software 12.0.06 when I hook up to 2.8 CRD and run the software it gives error that cant find ECM I have tried this five times and no luck. Yes key is on but does not see ECM any suggestions Jim Sult |
Author: | Yeti [ Tue Mar 12, 2019 2:49 pm ] |
Post subject: | Re: DIY ECU Flash |
have you installed the v13.02 after the v12 ? |
Author: | jimsult [ Tue Mar 12, 2019 3:02 pm ] |
Post subject: | Re: DIY ECU Flash |
That I am not sure. should I use the files on the CD that came with cable or just download from someplace |
Page 80 of 93 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |