Hey guys,

I converted my 05' crd to manual trans and it is all together except for the clutch position wire. (haven't looked up wiring yet). I just removed my GDE hot tune because they can't get me a manual transmission hot tune (EPA). I spoke with Marco and he needs my factory file to make me a tune. I flashed the truck back to stock today with the GDE tuner and it shows in software menu that I have original tune. I have mpps cable labeled v13 and the software is labeled mpps 13.02. Software version in lower right corner says 12.0.0.6. It sees system voltage but won't read any information from my ecu. When I close the program I get Mpps.exe application error. It says (The instruction at 0x000000000000002D referenced memory at 0x000000000000002D. The memory could not be read.) I thought maybe because the trans module was still plugged in so I disconnected that. Still no change. The cable drivers are installed so it shows up. I am on a current windows 10 version msi stealth pro laptop. Just need some advise. Please help. I want to get this truck back on the road. It's been sitting for a while now and I miss it.

I think I have all the needed information. Ask if you need any other info.

I've got an 06 with the GDE Hot Tune. Can I use this to download that tune and install it on my 05 offroad build???

Hello, I just read my ECU and I see that I have version 813.
There is no Tune for this version?

I've tried unsuccessfully twice to reflash using Dez's 035 stock tune but it doesn't remove the
EGR insufficiency flow fault.

Does anyone have any guidance or suggestions. Everything seemed to go fine otherwise.
Thank you for this great guide.

With GDE now unavailable to most of us, has anyone made an effort at a mpg improving tune?
Yeti would you be interested?

Hey guys,

I converted my 05' crd to manual trans and it is all together except for the clutch position wire. (haven't looked up wiring yet). I just removed my GDE hot tune because they can't get me a manual transmission hot tune (EPA). I spoke with Marco and he needs my factory file to make me a tune. I flashed the truck back to stock today with the GDE tuner and it shows in software menu that I have original tune. I have mpps cable labeled v13 and the software is labeled mpps 13.02. Software version in lower right corner says 12.0.0.6. It sees system voltage but won't read any information from my ecu. When I close the program I get Mpps.exe application error. It says (The instruction at 0x000000000000002D referenced memory at 0x000000000000002D. The memory could not be read.) I thought maybe because the trans module was still plugged in so I disconnected that. Still no change. The cable drivers are installed so it shows up. I am on a current windows 10 version msi stealth pro laptop. Just need some advise. Please help. I want to get this truck back on the road. It's been sitting for a while now and I miss it.

I think I have all the needed information. Ask if you need any other info.

with an egr delete and power increase you can gain one km/lt or well 3 mpg , but not more

Marco

Bear with me In new to posting.. Have 2006 with 516 map. Anyone tell me how to save the DTC516.txt, from hrastprogrammer, in WinOLS? Edited in Notepad++ and set the P0101 P0101, P0103 P0102, and P1140 P2142 = 0. When I attempt to import it into a project, after dropping in my original map, which works great, I get EPROM Error - probably a data line was defect? Would really want a hot tune for it as the transmission has the transgo shift kit, Euro TC, and is solid.

Thanks!

Hello friends.

Maybe I can help someone ...

I searched for this file before ... and found it!

Jeep Grand Cherokee 2.7 CRD (WJ) {FW: 094-704}

EGR - disabled.

Use it!

Download:

https://dropmefiles.com/GJzLa

Yeti
Understood power gain plus mpg gain is limited.
I was thinking something different ... I would like a power decrease *** if *** the timing/fuel/boost mapping can be optimized for better mpg vs better torque.
I don't know enough about the various parameters on these engines to even begin to tinker trying to get mpg vs torque myself. I also understand GDE disabled the pilot injections and we aren't that deep into being able to reprogram that area of the ECM.
I seldom even hit half throttle stock 808 tune with dtc deletes. The 450nm tune would bring in too much tq converter shudder. I could drive around the shudder but the Mrs. could not. The 480nm tune in unuseable with so much shudder its almost impossible to stay out of the shudder zone.
PM me if you would like to play with an mpg tune I'll be glad to test and give some funding for the efforts.

Yeti
Understood power gain plus mpg gain is limited.
I was thinking something different ... I would like a power decrease *** if *** the timing/fuel/boost mapping can be optimized for better mpg vs better torque.
I don't know enough about the various parameters on these engines to even begin to tinker trying to get mpg vs torque myself. I also understand GDE disabled the pilot injections and we aren't that deep into being able to reprogram that area of the ECM.
I seldom even hit half throttle stock 808 tune with dtc deletes. The 450nm tune would bring in too much tq converter shudder. I could drive around the shudder but the Mrs. could not. The 480nm tune in unuseable with so much shudder its almost impossible to stay out of the shudder zone.
PM me if you would like to play with an mpg tune I'll be glad to test and give some funding for the efforts.

I have a 2006 and just downloaded the GDE ECO tune that is one it. This is the number that shows in wordpad.
1037512035P53363K0

Any idea on what YETI version tune to use? Seems it doesnt elude to one thats in the list.

THanks
Dan

if you want my custom tune , contact mevia email
unforunately/luckily I have no many time for the forum

I make tune for all Jeep crd and tune Nag1 transmission and 545 RFE with NGC4 controller

than I'm little busy

Squeeto,

Regarding the originating post of this thread, here are the files from the MPPS V13.02 CD that comes with the MPPS V13 cord and smart connector. They are stored in a folder in Dropbox.com, and here is a link to that folder...
https://www.dropbox.com/sh/j2hj5z74bqgz ... Rjn2a?dl=0

It would be great if you would edit this link into your originating post for this thread. Anyone that cannot find their CD or it won't play, they will be able to use it.

Dean.