| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| DIY ECU Flash http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=78418 |
Page 5 of 93 |
| Author: | disjaukifa [ Sun Mar 16, 2014 8:08 pm ] |
| Post subject: | Re: DIY ECU Flash |
samse2101 wrote: Can anyone help me get registered there? Thanks Grant |
|
| Author: | Eskymo [ Mon Mar 17, 2014 1:14 am ] |
| Post subject: | Re: DIY ECU Flash |
Hey guys, I've just ordered my MPPS cable. I have a 2005 CRD 2.8 Limited KJ, In Australia here they call it the Cherokee, but in US it's the Liberty Limited. I've had the GDE Eco tune in for awhile, and have the Hot tune in the flasher. I'd love to try doing it myself, but not sure what ECU I have in. D'you think any of the tunes already tested will work in my KJ? If not, I'll have to start from scratch... Thanks heaps for all your hard work so far. It will benefit so many of us who want to tinker. Rob |
|
| Author: | Squeeto [ Mon Mar 17, 2014 2:21 am ] |
| Post subject: | Re: DIY ECU Flash |
You may have software 1037380809. Can you load the original tune back in without loosing your GDE stuff? When you get your cable, send me the original and I will have a look; Yeti will probably have a good idea as well. |
|
| Author: | Eskymo [ Mon Mar 17, 2014 7:28 am ] |
| Post subject: | Re: DIY ECU Flash |
Yep, I have the original tune in the Alienware flasher unit. I can swap between the 3 tunes. As soon as I get the cable, I'll shoot the original across to you. Thanks! I have my son hooked now as well. He has an Audi, but has the same potential for changing or replacing the tunes. What have you guys started!!! 
|
|
| Author: | Yeti [ Mon Mar 17, 2014 11:10 am ] |
| Post subject: | Re: DIY ECU Flash |
Squeeto is right , you probabily have a 809 , load the original and upload it or send to me or Squeeto by email , your version it's the same in Europe |
|
| Author: | Squeeto [ Mon Mar 17, 2014 2:05 pm ] |
| Post subject: | Re: DIY ECU Flash |
Yeti do you have an 809 tune? |
|
| Author: | Yeti [ Mon Mar 17, 2014 2:42 pm ] |
| Post subject: | Re: DIY ECU Flash |
no , I have a 812 , but a member in KJITALIA .........our forum...... have a 2005 kj with this SW |
|
| Author: | cicciouk [ Mon Mar 17, 2014 7:00 pm ] |
| Post subject: | Re: DIY ECU Flash |
Yeti wrote: no , I have a 812 , but a member in KJITALIA .........our forum...... have a 2005 kj with this SW Me? 
|
|
| Author: | JieselDeep [ Tue Mar 18, 2014 4:49 am ] |
| Post subject: | Re: DIY ECU Flash |
Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? |
|
| Author: | MtnClimber [ Tue Mar 18, 2014 10:16 am ] |
| Post subject: | Re: DIY ECU Flash |
JieselDeep wrote: Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? Ditto - I also am having difficulty finding a downloadable version of ECM Titanium. Any suggestions or help would be appreciated. |
|
| Author: | disjaukifa [ Tue Mar 18, 2014 10:40 am ] |
| Post subject: | Re: DIY ECU Flash |
JieselDeep wrote: Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? MtnClimber wrote: JieselDeep wrote: Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? Ditto - I also am having difficulty finding a downloadable version of ECM Titanium. Any suggestions or help would be appreciated. Yup I'm in the same boat but would also take WinOLS as well. -Grant |
|
| Author: | Yeti [ Tue Mar 18, 2014 12:33 pm ] |
| Post subject: | Re: DIY ECU Flash |
search EcmTitanium4free garageforum |
|
| Author: | Yeti [ Tue Mar 18, 2014 12:33 pm ] |
| Post subject: | Re: DIY ECU Flash |
cicciouk wrote: Yeti wrote: no , I have a 812 , but a member in KJITALIA .........our forum...... have a 2005 kj with this SW Me? si tu 
|
|
| Author: | mass-hole [ Tue Mar 18, 2014 3:03 pm ] |
| Post subject: | Re: DIY ECU Flash |
disjaukifa wrote: JieselDeep wrote: Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? MtnClimber wrote: JieselDeep wrote: Got my cable in the mail, but having a devil of a time figuring out where to download the program from. ECM Titanium, but the link I saw earlier requires a login and isn't allowing new registrations right now. Any advice? How did you guys download ECM Titanium? Ditto - I also am having difficulty finding a downloadable version of ECM Titanium. Any suggestions or help would be appreciated. Yup I'm in the same boat but would also take WinOLS as well. -Grant WinOLS is available as a demo version for free from the people who make it. |
|
| Author: | MtnClimber [ Wed Mar 19, 2014 1:46 pm ] |
| Post subject: | Re: DIY ECU Flash |
Yeti wrote: search EcmTitanium4free garageforum Looks like you have to create an account and also donate money to be able to download the app, so not necessarily free. |
|
| Author: | disjaukifa [ Wed Mar 19, 2014 1:50 pm ] |
| Post subject: | Re: DIY ECU Flash |
Update on Yeti's mild tune, I got some torque converter shutter today getting onto the interstate  So it looks like I'm going to have to go back to the stock tune with just the EGR delete incorporated with it. Hey Yeti is there a way you can modify the torque limiter table so we only have 275ft-lb torque when in overdrive? -Grant |
|
| Author: | Yeti [ Wed Mar 19, 2014 2:07 pm ] |
| Post subject: | Re: DIY ECU Flash |
send me your file an I detune |
|
| Author: | disjaukifa [ Wed Mar 19, 2014 2:09 pm ] |
| Post subject: | Re: DIY ECU Flash |
Yeti wrote: yes it's possible , send me your file an I detune Its the middle one from you first post. If you need the one from my ECU, I can do it this evening. Thanks Grant |
|
| Author: | Yeti [ Wed Mar 19, 2014 3:14 pm ] |
| Post subject: | Re: DIY ECU Flash |
disjaukifa wrote: Yeti wrote: yes it's possible , send me your file an I detune Its the middle one from you first post. If you need the one from my ECU, I can do it this evening. Thanks Grant the file it's ready , i have detuned , early ....the torque are increased at 22% now it's at 7% , try this send me your email |
|
| Author: | Yeti [ Wed Mar 19, 2014 3:23 pm ] |
| Post subject: | Re: DIY ECU Flash |
Yeti wrote: disjaukifa wrote: Yeti wrote: yes it's possible , send me your file an I detune Its the middle one from you first post. If you need the one from my ECU, I can do it this evening. Thanks Grant the file it's ready , i have detuned , early ....the torque are increased at 22% , now it's at 7% , try this send me your email guys studied a little bit , this map posted are fine and work , but any car are different and request adjusting from any personal usage and usury , if you load the file , you must know a little bit what you do 
|
|
| Page 5 of 93 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|