| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=81171 |
Page 1 of 1 |
| Author: | lanthony2020 [ Thu Jan 22, 2015 6:35 pm ] |
| Post subject: | 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
Hello, my transmission cooler is leaking across the bottom. First, what type of fittings connect the transmission lines to the transmission cooler. These are some strange ducks? Metric Euro-pipe? Can't find a fitting to adapt to the OEM line fittings? Second, will the transmission cooler come out without disturbing the AC, Radiator or Intercooler? Third, How much for an OEM replacement. Mopar Parts online does not list them. Thanks, LN |
|
| Author: | lanthony2020 [ Sat Jan 24, 2015 3:00 pm ] |
| Post subject: | Re: 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
Got it! There is a clip to remove these factory connectors. Then it was just hose to new BM and everything is working. LN |
|
| Author: | The Squid [ Fri Jun 19, 2015 1:02 am ] |
| Post subject: | Re: 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
Having the same problem with mine. Did you replace the cooler? OEM - Aftermarket? Been trying to figure out how to fix it Thanks, |
|
| Author: | jeeplibertycrd [ Wed Aug 24, 2016 10:16 pm ] |
| Post subject: | Re: 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
I just put clamp on original connector one on each side and mine is working. No one posted this fix and is easiest. Old hose looses its clamping from crimps and now is crimping. |
|
| Author: | fitty [ Sun Sep 04, 2016 11:49 am ] |
| Post subject: | Re: 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
For anyone wondering, the fittings are 3/8" Jiffytite connectors. Very common on GM Trans/oil cooler lines. |
|
| Author: | crashcapt29 [ Wed Sep 07, 2016 12:31 pm ] |
| Post subject: | Re: 2005 CRD Liberty Sport 4x4 Transmission Cooler Leaking |
I had a leak in the cooler portion of the a/c condenser so I had it drained of Freon, had the leak fixed and reinstalled. Then I found a leak in one of the lines. I couldn't get my tool to work so I unscrewed them. Then cleaned them out and the connection tool worked fine. Replaced after the line was fixed and then had Freon replaced. All good now. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|