| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| DIY flash for tpms http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=84998 |
Page 1 of 1 |
| Author: | Phx flyer [ Thu Jul 21, 2016 9:05 pm ] |
| Post subject: | DIY flash for tpms |
After learning that the spare tire sensor ID must be programmed every time the spare tire is rotated. I am wondering if any of the software programmers on this site might come up with a DIY way of entering in a tpm sensor ID for the spare tire. After reading and using one of the DIY ecu flashs for egr delete, I am thinking somebody (much more code savy than me) might know how to do this. I have a 2005 Liberty with tpms on all tires and spare. Any comments will be appreciated! To buy the Chrysler programmer to do this would require a bank loan! |
|
| Author: | Yeti [ Mon Aug 08, 2016 7:55 am ] |
| Post subject: | Re: DIY flash for tpms |
unfortunately the only way is the swiftech vci pod with DRBIII emulation , you can find on Aliexpress , but I don't have certainties that you can disable it |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|