Nice mod!
I did something very similar using some scrap *Lexan I had on hand. (it is much stronger than plexiglass and the OEM plastic shroud material)
I made a sandwich on each side with the shroud plastic in the middle so the upper shroud slides down in between the two pieces of lexan that are pop riveted to each side of the bottom half of the shroud. Once the top half of the shroud is bolted in place, the bottom half cannot move at all.
*Lexan is a brand name for a polycarbonate sheet of plastic. This plastic sheeting is durable, heat resistant, and so impact resistant that some "bulletproof" glass is made of Lexan.
_________________
Supporting Vendor and Moderator of LOST05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount98 Dodge Cummins 24 Valve