Found the map sensor but cant find the maf sensor and i want to replace it as im getting code P0101


Sent from my iPhone using Tapatalk

Go to the Section "Liberty CRD Love That Torque"

Right at the top of the page is "SAMS NOOB GUIDE"

There you will see photos of the engine and you will find the MAF sensor there.

You may find that it has been unplugged as I believe this is what owners do to disable the EGR....a software patch can disable this error if the MAF is disconnected but I believe this is no longer possible as it is deemed illegal to disable the EGR!

So if you see this MAF sensor is unplugged..simply plug it in again! My 2002 2.5L Export CRD does not have this setup so I may be at fault here with the above information!

_________________
2002 Export CRD

MAF (Mass Airflow Sensor) is located on top half of air filter housing as shown in this picture:

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve