| LOST JEEPS http://www.lostjeeps.com/forum/phpBB3/ |
|
| ECU reading and tunes http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?f=98&t=91582 |
Page 1 of 1 |
| Author: | rchuish [ Mon Jul 20, 2020 3:02 pm ] |
| Post subject: | ECU reading and tunes |
I am sure that some one some where has posted this but I am trying to pull the coding on my ecu with MPPS and it starts talking then gives me a message that says no response from ECU but also provides the following information. Chrysler, Jeep Cherokee 2.8L CRD Bosch EDC16CP31 K-Line/CAN VIN No' : 1J4GL48526W135154 Chrysler Ecu Type : BOSCH EDC16C/C2-9.9 Chrysler File No' :1037380808 Chrysler Software No' : 68090474AA Chrysler Factory No' : MA6VU63K0XX01 Bosch Ecu Version No': RB Cnt-No CR3K/630C Bosch Prodution No' : RB SW-No 2.8l/118K Ecu found on CAN. It looks like my ecu software is an 808 and I can use one of the 808 tunes listed but I am concerned because I can't get the original code to fix things if writing the tune goes wrong. Any body have tips or advice on what I have going on. Thanks in advance all |
|
| Author: | Yeti [ Fri Dec 10, 2021 2:08 pm ] |
| Post subject: | Re: ECU reading and tunes |
you must be sure you can read if not , probably you can't write |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|