If you have already installed or are planning on installing ARP head studs in place of the OEM stretch to yield head bolts ; watch these YouTube tests by the Torque Test Channel.
Very informative!

12ton Dyno Charts of ARP, OEM, L19 & More
https://www.youtube.com/watch?v=VlfVt1wqr40

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

It would be nice to see how the arp 625s stack up, I use to use them when building trucks for competitions, strongest head studs arp makes


Sent from my iPad using Tapatalk

FYI, here is a new YouTube video just out (9/9/22) by the Torque Test Channel.
It is a good video and really shows the advantages of using ARP Head Studs vs TTY bolts.

CAN You Reuse Cylinder Head Bolts? Testing Myths + ARP Custom Aged 625+
https://www.youtube.com/watch?v=0b2B6AUzYtw

_________________
Supporting Vendor and Moderator of LOST
05 Jeep Liberty CRD Limited
Ironman Springs/Bilstein/Shocks
Yeti StgIV Hot Tune
Week's BatteryTray
No FCV/EGR
Samcos/ProVent
SunCoast/Transgo
Carter Intank-pmp
2mic.Sec.Fuel Filter
Flowmaster/NO CAT
V6Airbox/noVH
GM11 Bld.fan/HDClutch
IronrockArms/wwdieselMount
98 Dodge Cummins 24 Valve

Good to see… wish I could get them for the Jeep but on the other hand I am selling my personal Jeep… I bought something that does what I want even better… 2011 land cruiser 200 series


Sent from my iPad using Tapatalk