I ordered a 2.5" Daystar lift today and it should be in at 4 Wheel Parts tomorrow. I want to just get new top plate studs rather than pressing out the ones from the stock top plate. Does anyone know what diameter and length wheel stud to use to press in? I would like to get them before I start tearing it all apart.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...

Probably a dealer part. Go to your local stealership and ask them.

_________________
2002 Jeep KJ Sport 3.7L 4x4

245/75-16 Mastercraft Courser HSX, 16x7 Cragar, 2" OME MD Lift, ARB Bumper
AEM Brute Force Cold Air Intake, Flowmaster Super 44 Muffler

Currently working on: Full service on transmission & bed-lining ARB bumper

viewtopic.php?f=43&t=84650

_________________
Heather

"Failure is when you watch other peoples' lives happen and forget to live your own."
AND
"Be kinder than necessary, for everyone you meet is fighting some kind of battle; your kindness may be all he receives this day."

I found the answer to my own question. It was buried in one of the other posts about a compressor install. I found the Advance Auto Parts part number. But, we don't have those here, so here is the info you need.

Dorman Part Number 98524.1 Dorman Website Link

Or just go to your local auto parts store and ask for a wheel stud for a 90's or 2000 model Ford Taurus rear drum brake. That will get it for you too.

They are M12-1.5 thread, which is not the same thread as the stock plates, so don't forget to get 8 M12-1.5 lug nuts too.

_________________
2007 Light Khaki 4x2 Sport
- Debadged - LTT CAI with Amsoil Filter - JVC HD Radio - Infinity BassLink
- Iggee Seat Covers - Black Moabs - 265/75-16 Cooper Discoverer ATP - 4.10's
- DIY Franky sitting at 23.75" - Al's 4.5 UCAs - Trimmed F&R Bumpers
- Removed Rear Sway Bar - Removed Rear Vibration Damper
- 75k miles so far...