It is currently Sat Sep 13, 2025 6:33 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: EVIC\tire monitor retrofit help
PostPosted: Sun Nov 19, 2006 10:40 am 
Offline
LOST Newbie

Joined: Fri Oct 27, 2006 4:11 pm
Posts: 10
I am wanting to add a evic to my 2006 sport CRD that will monitor tire pressure. Is there a way to tell if I allready have the sending units in the tires short of breaking the tire down off the rim and looking at the valve stem? I have fog lights, keyless entry, steering wheel radio controls. So I assume I have the correct BCM? Does anyone know which year\model's evic's monitor tire pressure?

Thanks LAB123


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 19, 2006 1:27 pm 
Offline
TRAILIN
TRAILIN

Joined: Wed May 24, 2006 8:54 pm
Posts: 692
Location: NW Iowa
I am under the impression that unless you already had the EVIC with TPMS, you wouldn't have the sensors. Get a build sheet form your dealer they can probably tell you for sure. I have an 05 Sport and just added an EVIC with TPMS and I have no sensors. Probably won't anytime soon because of the approaching holidays--way too busy with work and woodworking Christmas presents. I look forward to January 2 when things are back to normal!!! :lol:

_________________
2005 4x4 Sport
Yakima Low Riders
Hidden Hitch
MOPAR tow hooks
RL Skink Step Sliders
Magnaflow
3/4 armored
235/70/16 Grabber AT 2
and a lot of little stuff...


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 19, 2006 2:18 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Nov 26, 2005 1:55 am
Posts: 862
Location: Los Angeles, CA
If the caps on your valve stems have O-rings then you probably have TPMS sensors. To keep moisture out of the sensors, these caps are required with the TPMS. I thought TPMS sensors came in all 03-up Libertys by law....

_________________
Jeep Liberty Wikibook
# cd /home/fuzzymuzzle.com


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 19, 2006 5:45 pm 
Offline
LOST Newbie

Joined: Fri Oct 27, 2006 4:11 pm
Posts: 10
I looked at the valve stem caps, they appear to have a flat faced o-ring in them, but so do the valve caps on my 93 f-150. Maybe I didn't look in the right place, or understand what you meant? Also does anyone know how to tell by looking (say at a salvage yard) if the evic's supports TPMS

Thanks LAB123


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 19, 2006 5:57 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Nov 26, 2005 1:55 am
Posts: 862
Location: Los Angeles, CA
No, that's what I meant. I have the TPMS and can take a picture of my stems and caps if you'd like. I don't think you can tell whether the overhead console has TPMS unless you turn it on. The safest bet is to find one from a Limited, because they're much more likely to have TPMS, in fact they may have it standard. You might want to check out this page for more info: http://en.wikibooks.org/wiki/Jeep_Liber ... d_Consoles

_________________
Jeep Liberty Wikibook
# cd /home/fuzzymuzzle.com


Top
 Profile  
 
 Post subject:
PostPosted: Sun Nov 19, 2006 9:52 pm 
Offline
LOST Newbie

Joined: Fri Oct 27, 2006 4:11 pm
Posts: 10
Thanks for the info. If you can get pics up that would be great.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com