I am going to buy a bull bar this week and had a question on if I should put a rusty's top plate on to support the front.I have the ome hd coils in front with the 1 1/2 spacers.I am concerned with the cv angles though and will only put the plate on if the springs will sag when installed.The front spring's are brand new.What are yor thought's?

_________________
2003 liberty sport v-6 5spd
light khaki
frankenlift
als arm's
rusty'sdiff cover
rusty's lower rear arms
rusty's skids and custom shackle's
rusty's rock rails
rusty's air tube
magnaflow exhaust
trueflow cone filter
throttle body spacer
oem renegade fog light's
bf goodrich 245/75/16 all terain ko
16X8 cragar black d's

Steel Bullbar = top plate must !

Have a nice day.

_________________
Custom, Comfortable & Capable.......just the way it should be

Mine hasnt went down that much maybe 1/8 or so and have had it on for 6000 miles plus

_________________
MUDD'S MOTORSPORT'S We do IFS lift installs ,
03 OVERLAND EDITION /Kilby-Skidrow-Mopar-4XGuard skids/ 2.5 inch TOTAL CONTROL JBA coilovers -JBA Arms/MOABS-31 FALKEN WILDPEAK AT3W / 4.10's etc, 04 Kilimanjaro Edition loaded, plus 05 KJ limited