Are all fasteners on Liberty Metric?

Wasatch15 · **Joined:** Wed Jul 13, 2005 7:52 am **Posts:** 242

Just wondering if any of the tools in my off-road kit need to be SAE? :?:

corwyyn · **Posted:** Sun Sep 11, 2005 10:19 am

The only thing that comes to mind that might be SAE is litle stuff like the bolts on hose clamps or other small assembly items, but I would think even most of those would be metric. I do know when I would work on my '98 Dakota that I used metrics all the time and I haven't used an SAE wrench yet on my Jeep.

rlruss · **Joined:** Sat Jul 09, 2005 10:49 am **Posts:** 21

Funny you should ask. I replaced my brake pads on my 2003 renegade yesterday and the two bolts that hold the rear caliper on are 1/2" SAE. I thought this was weird; I have done quite a bit of wrenching on my KJ and it was the first fastener that I have fouun that is not metric or Torx.

corwyyn · **Posted:** Sun Sep 11, 2005 10:41 am

rlruss wrote:

Funny you should ask. I replaced my brake pads on my 2003 renegade yesterday and the two bolts that hold the rear caliper on are 1/2" SAE. I thought this was weird; I have done quite a bit of wrenching on my KJ and it was the first fastener that I have fouun that is not metric or Torx.

That is weird. When I would replace the brake pads on my Dakota the bolts holding the caliper assembly on took a 7mm allen wrench

Guess it depends on the manufacturer...

Are all fasteners on Liberty Metric?

Who is online