what is the best way to go about waterproofing the KJ's electrical system for deep water fording and what are some key areas to focus on? I hit a lot of water and don't need that problem.

_________________
L.O.S.T. #225019
2003 Sport 4x4
Patriot Blue w/ trail rash
Flex-Zilla 4" Lift
TrailRash hi-lift mounts
Other stuff you wish you had

Die electric greese on all connectors, pack rear fan motor contacts with it, and do yourself a favor and install a cut off switch for the fan motor when going in deep water. Muddy water will dry and cake up on your armature springs & bushings, you will loose electrical contac, which means your fan motor won't turn and you'll over heat quickly. If this happens, just pull the shroud, disasemble the fan motor and clean with water, then reasemble. I always carry a 2 gal. jug of water just in case it ever happens again.

_________________
Slightly modified Lt. Khaki 3.7 2004 LTD 4X4. Purchased new 8/6/03.
What I don't have....A Mag light mounted to my seat.
Original Old L.O.S.T. #000354

Nick's Pics & Mods click here: http://www.cardomain.com/ride/531173
http://www.survivaltopics.com/forums/