Anyone have a materials list, mainly tools, for doing a coil lift?

_________________
Pre-Lowered 02 Liberty
2.5" Rustys Coil w/ Ranchos in the rear.
ARB, OME927's, 1/4 strut plate and Als Gen 4.5 Uppers in the front.
Flowmaster Super 40 Series (GONE, SO QUIET!)
245/75/16 Kumho KL-78 w/ Spidertraxxxxx
Ripped out the plastic inner wheel liners
Herculined ALLLL over.....

mostly genral hand tools
the hard part is compressing the springs

I would find a shop with a bench mounted spring compressor ,trust me
I wached them do the OME med duty's for the wifes ride and it was not easy, not real bad but not easy
I would hate to try to do that with the funky little things they rent at auto zone

Good point, Jason. I used the funkly little things they rent from Auto Zone once. I can't imagine using that contraption without my brother's air tools and impact wrench. Next time I need front springs, I'll pay the $100 at Pep Boys or 4 Wheel Parts.

_________________
2003 Liberty Sport
Bright Silver Metallic
Daystar lift
General Tire Grabber AT2 245/70R16