Trying to find that darn part number for the front bumper rivets from napa? Did a search but nothing except for the flare rivets #...Unless their the same. Thanks for the help

Josh

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

Napa #770-2871 (6.33 dia (1/4 drill) is what it says on my package

Thanks for the help!

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

Get the applicator tool too while you're at it. Otherwise you have to use a plier to pull down the center shaft while holding the base up (with screwdriver or something) --- awkward but can be done

_________________
DIRTY KJ :: flickr photostream
"Primitive life is very common and intelligent life is fairly rare ... some would say it has yet to occur on Earth" --- Stephen Hawking

I will make the pliers work one way or another! Thanks

_________________
**REMEMBER YOU CAN ALWAYS GET A HUMMER IN A JEEP.... YOU CAN'T GET A JEEP IN A HUMMER**
2003 Jeep Liberty(KJ) Renegade,235/75/16 Goodyear Wrangler Silent Armors 245/75/16 MTR's,Factory Skids, Selec-Trac,trac lock,Husky Floor Liners,OME Lift,948 rear/926 front,Rusty's strut plate,clevis 2.5 "s, Al's UCA's Gen 4.5.

Try a set of pliers against the rivet and a Vice grip to pul the extension. I broke acouple that way, but once I got the hang of it, it worked great and you'll have plenty in the box to work with

_________________
2005 Liberty CRD, 245/75R16, OME CRD Springs front, OME HD rear