Thanks for the welcome I just can't get enough of this site and finding so many people who love the Liberty as mush as I do.
Bu the way I did finallyt find what I was looking for plus for those of you who want to turn your horns of lend me your ears. Here is what I've learned in just one week of coming mto this Site:
Many of these options are available to program with an EVIC, but if your Libby is nit equiped with ino, you can still make some changes to suite your needs the features below are available to anyone who has a keyless entry system regardless of whether it is equipped with Sentry key/Alarm.
#1 AUTOMATIC (ROLLING) LOCKS
This is the "Lock when the vehicle is going 15 mph" feature. This feature can also be disabled through the EVIC.
The rolling locks feature can be toggled ON/OFF by using DRB IIIt only.
{THE ONE SOME HAVE BEEN ASKING ABOUT}
#2 HORN CHIRP DISABLING / ENABLING
"This controls if you want your Libby to beep the horn when locking via the keyless entry. *Reports indicate that this does not work for 05 models.
To DISABLE (cancel) the horn chirp feature, Press and hold the transmittter LOCK button for four to ten seconds.
While pressing the Lock button in press the UNLOCK button.
Release both buttons.
To ENABLE (restore) the horn chirp feature, repateat the above procedure.
#3 OPTICLE CHIRP (FLASH) DISABLING / ENABLING
This controls if you want your Libby to flash the hazard lights when locking/unlocking via the keyless entry.
To DISABLE (cancel) the optical chirp feature, Press and hold the transmitter LOCK button for four to ten seconds.
While pressing the LOCK button in, Press the TAILGATE RELEASE button. Release both buttons.
To ENABLE (restore) the optical chirp feature, repeat the above procedure.
#4 TAIL GATE RELEASE DELAY
The Liberty can be set to POP the tailgate instantly when you press the button, or require it to be pressd and held for it to open. Press the UNLOCK button for four to ten seconds. While pressing the UNLOCK button, Press the TAIL GATE RELEASE button. Release both buttons. This will toggle between PRESS AND HOLD and PRESS (NO DELAY).
{This is the one I was originally looking for but could not find when I first posted}
#5 UNLOCK SEQUENCE
When unlocking the Liberty, you can choose between unlocking Drivers door first or unlocking All doors simultaneously.
Press and hod the transmitter UNLOCK button for four to ten seconds. While pressing the UNLOCK button in, Press the LOCK button. Release both buttons. This will toggle between Drivers door first and Unlock All doors function.
I found this on one of the other Jeep links, bu5t since you all showed so much interest I thought that after the warm welcome you all have given me I should share what I finially found. Thanks for the help and the support . I've got family coming to town for the next week so it will be a while till I can post pictures of my Blue Liberty but I will as soon as I can. Also If any are interested I am a Life Time AMS/OIL dealer for 20 plus years not in it for the profit just wanted to get a good price on synthetic oil

. I have it in my Libby from bumper to bumper and would be happy to pass it on to you at my cost. Thanks again and hope to hear from more of you all soon.

[/u]