It is currently Mon Mar 09, 2026 5:27 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 16 posts ] 
Author Message
 Post subject: Fire Extinguisher mount - ideas
PostPosted: Sat Jul 21, 2007 6:11 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
I bought a fire extinguisher for the KJ & have mounted it in the back on the luggage barrier. Has anyone else put in there KJ, perhaps in a better position. I used 4 cable ties & it wont budge :D , and as I wasn't sure where to bolt it I put it there. If you have any ideas of a better spot or where I can safetly bolt it + pic's of your set up, that would be great.

On another note while putting this in, my wife bought me a compass for the dash board. It wouldn't work, always said I was heading south (funny that). The only place it gives a real reading is mounted to the sealing on the light up front. Very strange, must be to do with the engine or something.

Image
Image

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 7:15 am 
Offline
LOST Junkie
User avatar

Joined: Mon Feb 26, 2007 5:28 pm
Posts: 561
Location: Stillwater, OK
don't really have any experience in mounting one in a KJ but I wouldn't think that would be the best spot for it. What if you need to get to it quick you have to get out and go all the way around to get it. What if your backed up somewhere that for some reason you can't get the gate open? Then what do you do?

I don't know how big your extinguisher is but there's a small space under the drivers side seat will it fit there?

I'm sure in most normal situations you'll never need it or maybe helping someone else out or it's not a life threatning fire and you've got plenty of time to get it, but for that ONE time that you really have to have it and you can't get to it I'd hate for it to be unaccesible.

Just my .02

_________________
-Gavin
2006 4x4 Sport ~ Dark Khaki
2.5" Rockfather II
Tow Hooks ~ HH Rear Hitch
Hella 500's

gwip Design


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 10:44 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
pokefan wrote:
don't really have any experience in mounting one in a KJ but I wouldn't think that would be the best spot for it. What if you need to get to it quick you have to get out and go all the way around to get it. What if your backed up somewhere that for some reason you can't get the gate open? Then what do you do?

I don't know how big your extinguisher is but there's a small space under the drivers side seat will it fit there?

I'm sure in most normal situations you'll never need it or maybe helping someone else out or it's not a life threatning fire and you've got plenty of time to get it, but for that ONE time that you really have to have it and you can't get to it I'd hate for it to be unaccesible.

Just my .02


Good point pokefan, I was just thinking of where to put it so my kids couldn't get to it. What do you know about drilling into the floor or the KJ. Do you use a self tapper or would it be best with a nut & bolt setup.

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 11:31 pm 
Offline
LOST Addict

Joined: Thu Feb 02, 2006 10:06 pm
Posts: 1201
Well, what I did was put it under the passenger seat. It is not very high tech, but here is what I did:

http://www.cardomain.com/member_pages/s ... 7_full.jpg
http://www.cardomain.com/ride/2662913/3

Also, I contacted RAM mounts, since they have a mount for everything except a fire extinguisher and asked them what they would do. They sent me this:

http://www.custommounts.com/PhotoGaller ... RAM%2D118B
http://www.custommounts.com/PhotoGaller ... =RAM%2D118


Top
 Profile  
 
 Post subject:
PostPosted: Sat Jul 21, 2007 11:39 pm 
Offline
LOST Addict
User avatar

Joined: Mon Jul 02, 2007 1:31 am
Posts: 1029
Location: Lakewood, Colorado
I haven't looked I have a Mag light mounted on the panel just left of the emergecy brake but I would check out left of the streering wheel on the lower panel if you going to carry a fire extinguisher then just like a GUN if you can't grab it quick in an emergecy it's like a rubber with a whole in it WORTHLESS. Keep this in mind with any emergency gear If you can't get to it fast don't bother. Sad but true :roll:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 3:33 am 
Offline
LOST Addict

Joined: Thu Feb 02, 2006 10:06 pm
Posts: 1201
Get to it quick...

I can get to it pretty quick, just reach over and a good hard yank and it will come off. I would like to have it on the drivers side so it would be even quicker, but I will not put it anywhere on that side until I get a bullet-proof mounting system. A fire-extinguisher is a good idea, but a fire extinguisher underneath my brake pedal is a bad idea, so for now it stays on the passenger side.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 10:25 am 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Sat Feb 17, 2007 7:26 pm
Posts: 1325
Location: Casper, Wyoming
I couldn't get mine to fit under the driver's seat because of the elec motors but, it fit under the passenger seat pretty well...

Image
Image

_________________
Ron


"There are few problems in life the liberal application of duct tape can't solve."


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 5:04 pm 
Offline
This member has been Banned

Joined: Thu Mar 16, 2006 7:18 pm
Posts: 2301
Location: Harahan LA (the burbs)
A word of experanced caution
DO NOT mount a fire extinguisher where it can get hit by direct sun light or get very hot
I know that it sounds funny saying dont get a fire extinguisher hot but here is what happened to me

I am required ,or was until this happened, to carry an extinguisher in my work truck
it does not have tinted glass and has gotten so hot that it broke the glass on a small level
well I had my extinguisher mounted to the side of the seat the truck sat parked out in the open for a weekend then on monday when I was driving down the highway it started to discharge wich is not good when you ar doing 80 on some back country highway and can not breath or see I found my self nearly on my side in a dich and had to climb out on the passenger side of the truck
with no cell service I had to hich to a gas station and call a tow truck from there wich then had to call a bigger truck to get my truck out of the dich all over a stupid extinguisher
I have it mounted in the tool box now and should the POS truck cach on fire I plan to get out and let it burn :lol:

I also dont carry one in the TJ or the KJ so dont ask
I carry water and there is always mud or dirt near by to throw on it :lol:


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 22, 2007 11:35 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
Dje Ryu wrote:
I couldn't get mine to fit under the driver's seat because of the elec motors but, it fit under the passenger seat pretty well...

Image


This looks good, probably faster than where mine is now. I will re-think it tonight.

Quote:
A word of experanced caution
DO NOT mount a fire extinguisher where it can get hit by direct sun light or get very hot
I know that it sounds funny saying dont get a fire extinguisher hot but here is what happened to me


I was wondering that, so thanks for the info. Thanks guy's, I will probably remount up front but not under the drivers side.

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 26, 2007 3:42 pm 
Offline
LOST Member

Joined: Thu Jul 12, 2007 1:19 pm
Posts: 451
Location: NYC
Regarding your compass, if you have one of those wheel magnates in your glove box it might be throwing off the reading? Mine was missing when I bought the jeep but I've heard it's about as powerful as a speaker magnate.

_________________
'04 Liberty Limited - 245/70/16 Firestone Destination AT's, Mopar tow hooks, Draw-Tite Class IV hitch, Skid Row Engine & Transmission Skids, Mopar T-Case & Gas Tank Skids, Extended Breather Tubes, Red Top Optima, Sylvania Silver Star head lights, Hella 500FF bumper mounted driving lights


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 26, 2007 11:05 pm 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
scoobysnax wrote:
Regarding your compass, if you have one of those wheel magnates in your glove box it might be throwing off the reading? Mine was missing when I bought the jeep but I've heard it's about as powerful as a speaker magnate.


What's a wheel magnate :?:

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject: Re: Fire Extinguisher mount - ideas
PostPosted: Fri Jul 27, 2007 3:32 pm 
Offline
Lifetime Member
Lifetime Member
User avatar

Joined: Fri Jun 09, 2006 2:30 pm
Posts: 2522
Location: LOST in Wisconsin
CDKJ wrote:
On another note while putting this in, my wife bought me a compass for the dash board. It wouldn't work, always said I was heading south (funny that). The only place it gives a real reading is mounted to the sealing on the light up front. Very strange, must be to do with the engine or something.


I had a difficult time finding a spot for a compass. You have to get it as far from surrounding metal and speakers as possible. I found a suitable spot, I mounted it on 3M velcro low on the windshield right in the middle. It reads acurately until I turn on the wipers, then it will swing slightly with the wiper motion.

Image

_________________
2005 CRD "Ol' Blue"
Red Ryder carbine-action, two hundred shot range model air rifle with a compass in the stock and this thing which tells time.
My build page- RL Komodo Rear and TJM Front Bumper, armored, lifted, JBA Steel D30, 4.10s and ARB air lockers.


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 27, 2007 7:57 pm 
Offline
Forum Admin
Forum Admin
User avatar

Joined: Fri Jul 08, 2005 2:18 pm
Posts: 2210
Location: Gold Coast Australia
CDKJ wrote:
scoobysnax wrote:
Regarding your compass, if you have one of those wheel magnates in your glove box it might be throwing off the reading? Mine was missing when I bought the jeep but I've heard it's about as powerful as a speaker magnate.


What's a wheel magnate :?:


a wheel magnet some kj's in the us got tpms which is a tyre pressure monitoring system, the EVIC will diplay individual tyre pressures, we didnt got it here :(

_________________
http://www.cardomain.com/memberpage/742957
aussie KJ Lost No#150605
3" OME lift + Rancho RS9000xl's front and rear
prototype Airflow snorkel
Magnaflow cat back
265/70R16 Hankook MTRT03 on MOABS baby
4.10's and a truetrac up front
super skinks
coming soon
a myride wireless controller


Top
 Profile  
 
 Post subject: Re: Fire Extinguisher mount - ideas
PostPosted: Sun Jul 29, 2007 12:12 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
bugnout wrote:
I had a difficult time finding a spot for a compass. You have to get it as far from surrounding metal and speakers as possible. I found a suitable spot, I mounted it on 3M velcro low on the windshield right in the middle. It reads acurately until I turn on the wipers, then it will swing slightly with the wiper motion.

Image


That's a good spot, I will probably move mine there when my son rip's it from it's currnet spot. Mine has a blue led light in it & he loves to turn it on & flip it up hard against the roof :roll:, the trick is to buckle him up 1st.

Quote:
a wheel magnet some kj's in the us got tpms which is a tyre pressure monitoring system, the EVIC will diplay individual tyre pressures, we didnt got it here


How goods that, I wonder what they base there decisions on as to what to export or not.

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jul 29, 2007 2:23 pm 
Offline
LOST Junkie

Joined: Sat Jul 09, 2005 9:22 pm
Posts: 814
Location: Camas, WA
What? No peanut butter?

_________________
No one knows as much as all of us.


Top
 Profile  
 
 Post subject:
PostPosted: Sun Aug 12, 2007 6:14 am 
Offline
LOST Addict
User avatar

Joined: Tue Oct 17, 2006 11:28 pm
Posts: 1984
Location: Sydney
Moved it up front between the drivers seat mount's & the drivers door. I screwed the base of the mount into the plastic on the side where the door closes & used 2 screws & liquid nails into the carpet on the floor. Seems tight enough to me.

Image

Image

_________________
Member No: 152595
Susky Bro V The Highlander Terminator, got it Wuggs

Lifted by CRDSTU
265/70/16 STT's on 16x8 Chrome Soft 8's
CDKJ


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com