Al's 6" Lift

spencevans · **Posted:** Fri Jul 27, 2007 8:16 pm

tjkj2002 wrote:

m_innerst wrote:

does anyone have any idea what the price range for it will be compared to sfa

I'd be guessing about $3000-$4000,depending on if it comes with new front knuckles or not,then maybe add another $1000 or so for install.Then you got the cost of new tires(rims?) and you'll need a new rear driveshaft forsure,another $350-$1500 depending if you stay with the OEM slip yoke or do a SYE kit with CV shaft.

SFA for me baby. I can't wait for my Frankenlift to wear out.

Joe Jeeper · **Posted:** Sun Jul 29, 2007 12:19 am

Price will be about 1/2 what you guys are estimating I believe and the front end is finished, just an engineering adjustment to the rear portion of the lift and it will soon be released. Just an FYI.

RespectMyLibertay · **Posted:** Sun Jul 29, 2007 1:34 am

1/2 of what who said??? I said $1-3K; tjkj2002 said $3-4k. Either way, that's awesome news!

CD · **Posted:** Sun Jul 29, 2007 7:19 am

Joe Jeeper wrote:

Price will be about 1/2 what you guys are estimating I believe and the front end is finished, just an engineering adjustment to the rear portion of the lift and it will soon be released. Just an FYI.

Looking forward to some good flex shot's, see how this baby rocks :twisted:

Joe Jeeper · **Posted:** Sun Jul 29, 2007 4:28 pm

I understand this lift will work (or be available a bit different?) for the Diesel KJ's also! Joe

Joe Jeeper · **Posted:** Sun Jul 29, 2007 4:32 pm

I don't want a SFA because my front end has no tie rods to bend like on just about every trail ride I'm on with Wranglers. I have to watch my A-arms but I can hit dead center on the skid and no problem! I do need the extra 2" of clearance (more with the 33-34's) that will be coming with the new lift though! Just my feelings, the articulation with the SFA is undeniable admittedly! Joe

KW AV8R · **Posted:** Sun Jul 29, 2007 4:52 pm

Has anyone explored the possibility of using the front diff out of another vehicle in conjuction with this lift? I haven't been able to find one that might work but then again, I haven't searched too hard yet. I know that Al was using the stock D30A with some mods and I'll go that way until I find a better solution.

Joe Jeeper · **Posted:** Sun Jul 29, 2007 5:33 pm

I don't know but I know other things will be in the works after the lift is done and on the market. One thing coming out is a reinforcement for the front diff. a bolt on one I'm waiting for that one myself! Joe

Al's 6" Lift

Who is online