Putting on Decals

Renegade24 · **Posted:** Wed Oct 17, 2007 8:58 pm

This may of already been answered, but is there a place that tells you how to get decals on, in this case the renegade decal. For placement and other stuff i mean. if someone could point out a tutorial or something that'd b awesome.

pixeldzn · **Posted:** Wed Oct 17, 2007 9:06 pm

many people are just very careful and apply them dry, but once it's stuck, it's stuck.

Your other option is to make a solution of a very small abount of dawn dish detergent and water in a spray bottle. You wet the back of the decal and the surface you are going to apply it to, and then you can readjust until you are happy with the position. Afterwards you use some sort of squeegee or piece of plastic to force most of the water out from behind the decal into the application tape and let it air dry for a while, then you pull the application tape and you are done!

-- Don

Renegade24 · **Posted:** Wed Oct 17, 2007 9:15 pm

alright, sounds good, i just placed my order, ill post the results once they come. Thanks a ton

JHCRASH · **Posted:** Wed Oct 17, 2007 9:16 pm

Or you can go to a dirt bike shop. they sell some for applying aftermarket graphics that works real well.

Or a good foaming glass cleaner WITHOUT amonia in it.And after you squegee it let it dry for a couple minuites before you get crazy.

Renegade24 · **Posted:** Mon Oct 22, 2007 4:21 pm

aight, put em on, used the dish soap technique, worked great, thanks guys.

Putting on Decals

Who is online