1st pics after the lift...

Zeks05 · **Posted:** Sat Dec 29, 2007 1:42 pm

the pics were taken with a blackberry phone.. i hope they come out good.. yes theses are the 1st pics after the lift... i did the rustys full lift + 2 clevis rings + 2iso pads in the back... at the bottom of the front bumper i got 17inchs and at the bottom of the skirts i got 18 1/2 inchs... is this good? plz post ur's to know is i messed mine up or not.. plz side note... the measurements was on the stock wheels and tires.

jsc7002 · **Posted:** Sat Dec 29, 2007 1:53 pm

looks like you also tested the lift, looks good I cant wait to get my lift on

Fulltimer · **Posted:** Sat Dec 29, 2007 3:21 pm

Looks real good! It's hard to tell from the pics, is the back higher than the front?

Terry

Zeks05 · **Posted:** Sat Dec 29, 2007 5:11 pm

ya it is but only just a tad 1/2 inch or an inch... due to the ISO pads not settling yet but it will be lvl when they do... it looks good... i took some tires of a dakota to test fit 265/75s man do they ever look good.. imma do minor timming and they will look great..

DarbyWalters · **Posted:** Sat Dec 29, 2007 10:12 pm

Need pics of the cv angles at rest and ubj proximity to strut at rest.

Zeks05 · **Posted:** Tue Jan 01, 2008 11:58 am

if it helps... i can run my finger around the the back of the UBJ and it slighty rubs the coil... but ill get u pics.. and i got fat fingers lol...

wildrussian · **Posted:** Tue Jan 01, 2008 8:05 pm

2 iso pads will be too much in the back, it will rake bad after the front settles.

Zeks05 · **Posted:** Tue Jan 01, 2008 9:51 pm

well then in that case... when it happens if it does.. ill fix it... i mean its like an hours worth of work takeing a pad out on ethier side...

wildrussian · **Posted:** Wed Jan 02, 2008 9:48 am

Zeks05 wrote:

well then in that case... when it happens if it does.. ill fix it... i mean its like an hours worth of work takeing a pad out on ethier side...

Yeah its easy fix

Didn't mean nothing mean by it i just noticed that my Rustys front sagged some

Video Guy · **Posted:** Wed Jan 02, 2008 11:35 am

Congrats. That Rusty's package seems like a good value.

Zeks05 · **Posted:** Wed Jan 02, 2008 4:21 pm

how long did it take for urs. to start sagging? im thinking of getting the upper strut plates from rustys to settle the rake out a lil..

wildrussian · **Posted:** Thu Jan 03, 2008 8:20 am

Zeks05 wrote:

how long did it take for urs. to start sagging? im thinking of getting the upper strut plates from rustys to settle the rake out a lil..

For mine it took about 2 months to lose close to half inch. There are some people on here that have bad sagging problem with Rustys and for others it never saggs at all.

Zeks05 · **Posted:** Thu Jan 03, 2008 4:06 pm

well im going to order the strut plates this Monday coming. and it will gain a 1/2inch and it it piss's me off more and more ill buy the .75inch spring spacers and put in it.. lol..

renegadekj · **Posted:** Thu Jan 03, 2008 6:18 pm

Be prepared to drill out the holes on your strut plates! The hole alignment on mine just didnt match, Yours may be fine but i have also heard this from others as well.

Josh

Zeks05 · **Posted:** Thu Jan 03, 2008 6:50 pm

how far was the holes off?

Zeks05 · **Posted:** Thu Jan 03, 2008 6:53 pm

how far was the holes off?

1st pics after the lift...

Who is online