My 05 crd with 40,000 miles has developed a clunking or popping noise,it does not do it all the time but mostly when turnig slow or accelerating slitghly in a turn! It seems to be right under my feet or off to the right on the floor is where i feel it. I checked the ball joints and they are tight. There are so many bushing on this vehicle I don't know where to start looking. When I had my son turn the wheel back and forth with the engine running nothing is loose or makes that noise! Any takes guys??
Gregg

Exhaust is getting up against the body or loose right motor support bolts or worn cv joints in right axle - check'em in that order...........................

_________________
'05 CRD Limited
Pricol EGT, Boost
GDE Hot '11; EDGE Trail switched
SEGR; Provent; Magnaflow;
Suncoast T\C, Transgo Tow'n'Go switch;
Cummins LP module, Fleetguard filter, Filterminder
2.5" Daystar f, OME r; Ranchos; K80767's, Al's lifted uppers
Rubicons, 2.55 Goodyears
Four in a row really makes it go

Try this:
http://www.lostjeeps.com/forum/phpBB3/vie ... 818#352818


Follow the embedded links and read the surrounding messages to see if this may be your problem too.