It is currently Sat Oct 04, 2025 2:35 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: blower motor resistor
PostPosted: Mon Sep 22, 2008 8:21 pm 
Offline
LOST Newbie

Joined: Thu Jul 24, 2008 11:08 pm
Posts: 96
Location: NE Indiana
guys,

I am about to break something. I have read the posts about changing out the blower motor resistor but I can't get the wiring harness out. I pulled out the red part but can't get the stupid thing out.

I need help before I break something in frustration.

_________________
bigugly

2006 Liberty CRD
Power Box CR
Racor Fuel Filter Housing
Provent
Assembling SEGR
Suncoast T/C
No muffler


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 22, 2008 8:53 pm 
Offline
LOST Newbie

Joined: Thu Jul 24, 2008 11:08 pm
Posts: 96
Location: NE Indiana
forget it, I got it.

_________________
bigugly

2006 Liberty CRD
Power Box CR
Racor Fuel Filter Housing
Provent
Assembling SEGR
Suncoast T/C
No muffler


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 23, 2008 2:17 am 
Offline
LOST Junkie

Joined: Thu Aug 21, 2008 5:01 am
Posts: 691
Location: South Africa
Bigugly

Take me through the process of what you did, my blower dont work on no 1 and i don't want to bust anything either.......

_________________
06 CRD LTD ( Euro )


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 23, 2008 6:37 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
mackruss wrote:
Bigugly

Take me through the process of what you did, my blower dont work on no 1 and i don't want to bust anything either.......


Here's a thread with pictures over on KJ Country: replacing blower motor resistor block. It's located behind the glove compartment. You need to pull the red tab out (I used some wire thru the hole in the tab, others use various tools to go where their fingers can't), then squeeze up on the black tab and pull the connector off, then remove the single bolt and take the unit out.


Top
 Profile  
 
 Post subject:
PostPosted: Tue Sep 23, 2008 6:50 pm 
Offline
LOST Newbie

Joined: Thu Jul 24, 2008 11:08 pm
Posts: 96
Location: NE Indiana
Yup I used a pair of needle nose pliers to pull out the red tab but I had to use some pliers to pull out the wire harness also. There are two 8mm screws to take out, one on the top left and one on the bottom right of the resistor. The one on the bottom right is a pain to get out. Then just take it out and put the new one in putting the screws in first.

Oh, it is behind the glove box and you will have to press in the two tabs on the side of the glove box to get it to come out and out of the way.

_________________
bigugly

2006 Liberty CRD
Power Box CR
Racor Fuel Filter Housing
Provent
Assembling SEGR
Suncoast T/C
No muffler


Top
 Profile  
 
 Post subject:
PostPosted: Wed Sep 24, 2008 7:03 am 
Offline
Master of the Blender
User avatar

Joined: Thu Jul 07, 2005 4:21 pm
Posts: 2804
Location: Margaritaville
bigugly wrote:
There are two 8mm screws to take out, one on the top left and one on the bottom right of the resistor. The one on the bottom right is a pain to get out. Then just take it out and put the new one in putting the screws in first.

Oops, forgot the one down under the resistor block. Thanks for posting that 8)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group. Color scheme by ColorizeIt!
Logo by pixeldecals.com