Frostednutz wrote:
i weld for the navy and any questions about welding i would gladly answer. i think stick is the hardest as it is a pain to weld vertical. vertical with tig is cake. anybody can mig as long as it is setup right. brazing can be difficult as alot of factors can make a seemingly good looking braze a very bad one and brazing dissimilar metals like carbon steel to nickel copper is fairly difficult but i just tig it with some grade 3 filler material instead of using the oxy-actyl. the best way to get a good bead is to get comfy cause if you're not bad things happen.
What can you tell me about flux core wire feed welders? I used to be a steel fitter in a previous life so I have worked with stick arc, and MIG. I would like an inexpensive welder but I don't really know anything about these things.