Remember when i got my day star lift and they installed my Ranchos well the back had this rattle...you guys told me to get a washer and tighten it back down could someone elaborate where the washer goes and how big the hole in the middle needs to be.

Washer(s) go over the shock mount bolts (whichever has side to side play in it) ..Hole needs to be big enough to fit over the bolt (dont know the exact measurement off the top of my head - sorry).

_________________
A Jeep and a couple Fords.


I would wreck Kate Hudson.

YOu can place the washer between the shock bushing where it bolts up at teh top and the inside of where the shock sits. Place the bolt through it all and torque it all down. If it still rattles, tighten a little more or try another washer and repeat.

_________________
99 TJ
71 C101
04 KJ
03 SFA KJ Sport
LOST JEEPS So-Cal

Thanks guys