Renegade Lightbar Question

Prospect62 · **Posted:** Sun Jan 18, 2009 6:01 pm

Hey guys, hoping someone can figure this one out for me...

I am shopping for a Renegade lightbar for my unit and I came across an oddity. Some websites list the kit with the Part Number 82206126. Others list it as Part Number 82206126AB.

Big deal, it's the same kit, right? Well the one with part number 82206126 is listed for about $50 cheaper as the one with part number 82206126AB. Is there any difference in the two?

Help me I'm confused.

KJ kyle · **Posted:** Sun Jan 18, 2009 9:15 pm

i dont know this for sure, but I would guess one comes with the harness. it would make sence because some KJs have it factory, and some dont.

tommudd · **Posted:** Sun Jan 18, 2009 11:27 pm

I sold a 82206126AB last month, it was the complete kit with light bar, covers, wiring,switch, dash panels in two colors, everything needed to install. This may be the updated version and nothing more. Haven't seen a regular 82206126 yet :wink:

Neatus · **Posted:** Sun Jan 18, 2009 11:43 pm

I remember seeing a few of the lightbars that only had two lights on them. Maybe that is a difference... :?:

KJ kyle · **Posted:** Mon Jan 19, 2009 12:27 am

you mean it only has 2 lights, like the two inner lights arent there? that would look sweet... hmm

tommudd · **Posted:** Mon Jan 19, 2009 12:32 am

KJ kyle wrote:

you mean it only has 2 lights, like the two inner lights arent there? that would look sweet... hmm

was for Export only since some countries do not allow the 4 light bar,
also not sweet looking ...made the KJ look like Mickey Mouse :roll:

KJ kyle · **Posted:** Mon Jan 19, 2009 1:06 am

haha, mickey mouse... i guess i would have to see it, any pics?

Back-n-Black · **Posted:** Mon Jan 19, 2009 2:54 am

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

tommudd · **Posted:** Mon Jan 19, 2009 3:00 am

Back-n-Black wrote:

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

Have to remove the whole cover and then you can adjust them some if I remember right

Back-n-Black · **Posted:** Mon Jan 19, 2009 12:10 pm

tommudd wrote:

Back-n-Black wrote:

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

Have to remove the whole cover and then you can adjust them some if I remember right

Cool thanks Tom. I didn't want to get it all torn apart to find out they where fixed lights.

tjkj2002 · **Posted:** Mon Jan 19, 2009 12:23 pm

Back-n-Black wrote:

tommudd wrote:

Back-n-Black wrote:

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

Have to remove the whole cover and then you can adjust them some if I remember right

Cool thanks Tom. I didn't want to get it all torn apart to find out they where fixed lights.

No need to take the outer shell off,there is a hole behind each light that allows a Torx bit(T20 if I remember right) to fit in to adjust the up/down of each light in the lightbar.

Back-n-Black · **Posted:** Mon Jan 19, 2009 12:36 pm

tjkj2002 wrote:

Back-n-Black wrote:

tommudd wrote:

Back-n-Black wrote:

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

Have to remove the whole cover and then you can adjust them some if I remember right

Cool thanks Tom. I didn't want to get it all torn apart to find out they where fixed lights.

No need to take the outer shell off,there is a hole behind each light that allows a Torx bit(T20 if I remember right) to fit in to adjust the up/down of each light in the lightbar.

Rock on!!! That is even easier. Thank dude.

tommudd · **Posted:** Mon Jan 19, 2009 12:41 pm

Whoops

thought you had to take off the cover,
oh well thats my first mistake today :cry:

Have had two of them now and sold both, maybe I need to keep the next one and really look at it! :wink:

Neatus · **Posted:** Mon Jan 19, 2009 9:09 pm

KJ kyle wrote:

you mean it only has 2 lights, like the two inner lights arent there? that would look sweet... hmm

I think it looks dorky but to each their own

KJ kyle · **Posted:** Mon Jan 19, 2009 9:32 pm

i like it for the simple fact that no one has it... definatly draw some attention from the locals. where do i buy one?

2006 KJ · **Posted:** Mon Jan 19, 2009 11:20 pm

tjkj2002 wrote:

Back-n-Black wrote:

tommudd wrote:

Back-n-Black wrote:

Not to highjack but also on the 4 light renengade bars anyone know if the lights are adjustable for angle? If so how. I climbed up to look at mine and read threw the owners manual and i can't find anything. Mine point about 50' up into the trees at 100'.

Have to remove the whole cover and then you can adjust them some if I remember right

Cool thanks Tom. I didn't want to get it all torn apart to find out they where fixed lights.

No need to take the outer shell off,there is a hole behind each light that allows a Torx bit(T20 if I remember right) to fit in to adjust the up/down of each light in the lightbar.

x2

beat me to it

Renegade Lightbar Question

Who is online