Check Engine Light on after lift

nic8891 · **Posted:** Sat Mar 14, 2009 10:21 am

I have a 2002 Liberty Limited, and i bought the daystar 2.5" lift for it. well i spent 2 days installing the lift, went and got the goodyear wrangler mt/r 245/75/R16s mounted. Now my check engine light is on. Any ideas?

btw...where do i find my Lost number?

Jeepjeepster · **Posted:** Sat Mar 14, 2009 3:05 pm

Check the codes and see whats going on.

If its for the evap check all the evap hoses beside of the battery. Also, make sure you hooked the battery temp sensor back up.

Hard to tell without reading the codes though.

JL Rockies · **Posted:** Sat Mar 14, 2009 3:15 pm

Happened to me, I didn't plug one of the harnesses in all the way under the hood. You have to unplug a lot of stuff to get to those bolts.

nic8891 · **Posted:** Sat Mar 14, 2009 4:34 pm

the battery temp sensor is the one under the battery tray i suppose. and im about positive i hooked everything back up, but ill check it out. thanks for the info....any idea on how i find my lost member number?

also, just gee-whiz knowledge i guess, but there is a cable that is (grounded?) on the front right strut lug on the drivers side. what is that?

Maximum Carnage · **Posted:** Sat Mar 14, 2009 11:08 pm

Try this link for pulling your code.
http://www.lostjeeps.com/forum/phpBB3/viewtopic.php?t=1714

BTW: I can't remember how to get your LOST number.

Guest · **Posted:** Sun Mar 15, 2009 2:54 pm

nic8891 wrote:

also, just gee-whiz knowledge i guess, but there is a cable that is (grounded?) on the front right strut lug on the drivers side. what is that?

That is not a cable, that is the diff breather.

nic8891 · **Posted:** Mon Mar 16, 2009 3:16 pm

thanks for the info. I bought the haynes manual but it didn't mention what it was. :oops:

Check Engine Light on after lift

Who is online