Dune flag holder

SilverLakeKJ · **Posted:** Sat Apr 11, 2009 5:31 pm

What does everyone use to mount there duneflag?

03CDKJ · **Posted:** Sat Apr 11, 2009 6:01 pm

zip ties..

SilverLakeKJ · **Posted:** Sun Apr 12, 2009 7:55 am

Here at Silverlake they want the flag mounted to the front right now i have a temporary mount bolted to the clevice hole in my recovery point but looking for a better option

KJ kyle · **Posted:** Sun Apr 12, 2009 12:48 pm

a friend of mine bought a CJ5, and the previous owner put a quick release from an airline on his front bumper, then the male fitting on the flag. pretty cool little set up if you ask me.

KJ kyle · **Posted:** Sun Apr 12, 2009 12:53 pm

also, if it is something your going to use often (id imagine you would silverlakekj) there is this.

http://www.sandwizard.net/

MP Jeeper · **Posted:** Mon Apr 13, 2009 12:07 am

cdiekhans wrote:

zip ties..

x2

jeepkj02 · **Posted:** Mon Apr 13, 2009 9:19 am

SilverLakeKJ wrote:

Here at Silverlake they want the flag mounted to the front right now i have a temporary mount bolted to the clevice hole in my recovery point but looking for a better option

Can a dune flag be zip tied to the radio antenna?? Where can you buy dune flags from?

ihatemybike · **Posted:** Mon Apr 13, 2009 1:26 pm

On Eugene originally we were going to use a bicycle safety flag. The axle mount that comes with it came be mounted under one of the lugs holding the spare tire holder to the door.

Remove spare
Loosen one of the upper lugs holding the mount to the door
Slide flag holder on
Tighten lug
Bend holder upright
Mount spare
Install flag in holder when needed

jerbacher · **Posted:** Mon Apr 13, 2009 1:28 pm

ihatemybike wrote:

On Eugene originally we were going to use a bicycle safety flag. The axle mount that comes with it came be mounted under one of the lugs holding the spare tire holder to the door.

Remove spare
Loosen one of the upper lugs holding the mount to the door
Slide flag holder on
Tighten lug
Bend holder upright
Mount spare
Install flag in holder when needed

Thats what I did on mine too, but as was stated before, Silver Lake requires front mount....

Sean · **Posted:** Tue Apr 21, 2009 9:34 pm

SilverLakeKJ wrote:

What does everyone use to mount there duneflag?

I used a combination of L-brackets mounted to where my tow hooks are under the front bumper... I don't think I have any pictures, but I'll look around

Bad quality, but you get the point...

LostRenegade · **Posted:** Sat Apr 25, 2009 4:02 pm

I have a front hitch. I had a piece of metal welded onto a tow hook for my flag.

There are many shops around Silver lake that sell flags. They are about $20 for the flag. some will sell mounting hardware.

KJ kyle · **Posted:** Wed May 06, 2009 10:24 pm

can anyone who has been to silver lake tell me if they sell a "rip rod" style flag? apperently its just a 3/8" fiberglass rod.

anyways i just finished my flag mount... and thats the style i need.

Ill have pics tomorrow, my friend barrowed my camera and gave me his cell phone charger instead of my camera cord. :roll: