EHM - plugging the hose from the CCV

dog_party · **Posted:** Wed May 20, 2009 10:40 am

If one were to do (or have done) the EHM, what might one have used to plug the stock hose that is removed from the CCV?

honey_don't · **Posted:** Wed May 20, 2009 10:53 am

One might find that a synthetic wine cork works well.

dog_party · **Posted:** Wed May 20, 2009 11:00 am

Ahhh, another reason to pop the cork. I like it!

bdptp73 · **Posted:** Wed May 20, 2009 12:02 pm

I used a 3/4" pipe plug and a hose clamp. Might have been a 1/2" pipe plug,

mackruss · **Posted:** Wed May 20, 2009 2:12 pm

honey_don't wrote:

One might find that a synthetic wine cork works well.

Wine cork...

0311_DoC · **Posted:** Wed May 20, 2009 3:40 pm

i just used a wooden dowel that I bought at lowes

RAF 3829 · **Posted:** Wed May 20, 2009 7:16 pm

Took a bolt about 4" long that fit the hose and cut the threads off the end, deburred the end, and stuck it in the hose. Hose clamped it too.

SC RIGGR · **Posted:** Wed May 20, 2009 7:17 pm

A Spark Plug is a funny thing to find in a diesel. just dont connect a coil!

CRDMiller · **Posted:** Wed May 20, 2009 8:21 pm

Nice, spark plug :P

I used a bolt and a pair of hose clamps. If she finds a way to suck that in, well, let her have it.

Turbo Tim · **Posted:** Wed May 20, 2009 8:26 pm

kant membr waht cind of whine it wuz, butt sure goode. Nise gud lokin cork tat fixd tat hole..........