we both have the same rear springs but I have 1/2 spacer on top of mine. in front on the pics of digger's jeep you can see that the front is lower than the rear and on mine both ends are at the same height so I can say that my lift is a little more than a complete jba4 kit but I guess digger will pull some more tricks to lift his kk even more





yes on both pics its my steel bumper see the pics below



tires and spacers are ordered. they should be on in 2 weeks




yup







stock front



stock rear





you can see the resonator hagning way too low

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers

How does it ride? It looks great! You really have a unique KK

_________________
Out - 2008 Jeep Liberty Limited 4x4
In - 2011 Jeep Liberty Carbon Edition http://www.cardomain.com/ride/3972889/2 ... ed-edition

the ride is pretty stiff but still comfortable. I have a lot more control when I hit bumps. over all better but the shocks need tuning then they should be awsome

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers

I need some info on your sliders...

_________________
My Jeep Build ----> Big Black

theres not much to say about them other than they are heavy



I think I could put a bomb under my jeep and not even scratch it

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers

What do you think they weigh? How exactly do they mount? I see 4 mount arms and then that flat bar strip with 7 holes in it. What does the flat bar mount to? Are they telescoping? What is the big mother triangular piece and how does it mount to your jeep?

I'm not a cat person, but that cat that keeps popping up in your pics makes me crack up.

_________________
My Jeep Build ----> Big Black

they weight close to 100# each. theres nothing telescopic. I drilled holes in the frame for the mounts arm. the triangular piece is a 3/16 plate with holes lined up with the drilled bar to insert a rachet. the drilled bar makes contact under the doors starting at the pinch weld. I used rivets similar to the tranny skid plate rivets in the holes in the frame and under the doors where it looks like a long pinch weld lol I dont remember the name.

oh and my cat always check my designs and must approve before I can install

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers

If you ever get a chance, I'd like to see better pics of them mounted to your jeep.

_________________
My Jeep Build ----> Big Black

I removed them yesterday to paint them . Ill snap a few shot when they get back

_________________
08 KK north, select track
custom skids , sliders and steel bumpers
12k titan winch
4.56 gears, arb locker front and rear.
3'' fox lift, Jba A arms
33'' Bfg KM2 with 1 1/4'' wheel spacers

Thanks.

_________________
My Jeep Build ----> Big Black

Dupi

_________________
2012 KK Cherokee * Arctic by Musclez * Mineral Gray
- Too Much to list BUILD THREAD

What front springs are you running eibach usually does lowering springs and i couldnt find the ones specified bob.

_________________
2012 KK Cherokee * Arctic by Musclez * Mineral Gray
- Too Much to list BUILD THREAD